Department of Chemical and Biomolecular Engineering, Johns Hopkins University, Baltimore, Maryland 21218, USA.
Langmuir. 2012 Oct 16;28(41):14703-12. doi: 10.1021/la303508x. Epub 2012 Oct 5.
Central to the adhesion and locomotion of tree frogs are their structured toe pads, which consist of an array of 10 μm hexagonal epithelial cells separated by interconnected channels that are 1 μm wide and 10 μm deep. It has been proposed that the channels facilitate the drainage of excess fluid trapped between the toe pads and the contacting surface, and thus reduce the hydrodynamic repulsion during approach. We performed direct force measurement of the normal hydrodynamic interactions during the drainage of fluid from the gap between a structured and a smooth surface using surface force apparatus. The structured surface consisted of a hexagonal array of cylindrical posts to represent the network of interconnected channels. The measured hydrodynamic drainage forces agree with the predictions from Reynolds' theory for smooth surfaces at large separations. Deviations from theory, characterized by a reduction in the hydrodynamic repulsion, are observed below some critical separation (h(c)), which is independent of drive velocity. We employ a scaling analysis to establish the relationship between structural features (channel depth, width, and post diameter) and the critical separation for the onset of deviations. We find agreement between our experiments and the scaling analysis, which allows us to estimate a characteristic length scale that corresponds to the transition from the fluid being radially squeezed out of the nominal contact area to being squeezed out through the network of interconnected channels.
树蛙的粘附和运动能力主要依赖于其结构化的脚趾垫,这些脚趾垫由一系列 10μm 大小的六边形上皮细胞组成,这些细胞之间通过相互连接的通道分隔开,这些通道的宽度为 1μm,深度为 10μm。有人提出,这些通道有助于排出脚趾垫和接触表面之间被困住的多余液体,从而减少接近时的流体动力排斥力。我们使用表面力仪对结构化表面和光滑表面之间的间隙中液体排出过程中的法向流体动力相互作用进行了直接力测量。结构化表面由代表相互连接的通道网络的圆柱形柱列六边形阵列组成。测量的流体动力排水力与大分离时光滑表面的雷诺理论预测相符。在某些临界分离(h(c))以下,观察到与理论的偏差,表现为流体动力排斥力减小,该临界分离与驱动速度无关。我们采用标度分析来建立结构特征(通道深度、宽度和柱直径)与偏差起始的临界分离之间的关系。我们发现实验结果与标度分析一致,这使我们能够估计出一个特征长度尺度,该尺度对应于从流体径向挤出名义接触区域转变为通过相互连接的通道网络挤出的转变。