Suppr超能文献

采用飞秒脉冲(800nm)在低损耗 As2S3 光纤的聚合物护套上写入布拉格光栅。

Writing of Bragg gratings through the polymer jacket of low-loss As2S3 fibers using femtosecond pulses at 800 nm.

机构信息

Center for Optics, Photonics, and Lasers, Université Laval, Québec, Canada.

出版信息

Opt Lett. 2012 Sep 15;37(18):3900-2. doi: 10.1364/ol.37.003900.

Abstract

Fiber Bragg gratings (FBG) were written through the polymer jacket of low-loss single mode As(2)S(3) chalcogenide fibers by using femtosecond laser pulses at 800 nm and a phase-mask. Peak reflectivity in excess of 99% was obtained at 3440 nm after 5 min of exposure. The resulting FBG maintained a peak reflectivity of 90% after 64 min of thermal annealing at 100 °C. This demonstration paves the way to the development of all-fiber mid-infrared laser sources.

摘要

光纤布拉格光栅(FBG)通过使用 800nm 的飞秒激光脉冲和相位掩模在低损耗单模 As(2)S(3)硫属化物光纤的聚合物护套中写入。在 5 分钟的曝光后,在 3440nm 处获得超过 99%的峰值反射率。经过 100°C 热退火 64 分钟后,所得 FBG 的峰值反射率保持在 90%。这一演示为开发全光纤中红外激光源铺平了道路。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验