Department of Biology, University of Antwerp, CDE-C, Universiteitsplein 1 , 2610 Wilrijk , Belgium ; Centre for Research and Conservation, RZSA , Kongingin Astridplein 26, 2018 Antwerp , Belgium.
Biol Open. 2012 May 15;1(5):411-21. doi: 10.1242/bio.2012588. Epub 2012 Feb 17.
In brachiation, two main gaits are distinguished, ricochetal brachiation and continuous contact brachiation. During ricochetal brachiation, a flight phase exists and the body centre of mass (bCOM) describes a parabolic trajectory. For continuous contact brachiation, where at least one hand is always in contact with the substrate, we showed in an earlier paper that four step-to-step transition types occur. We referred to these as a 'point', a 'loop', a 'backward pendulum' and a 'parabolic' transition. Only the first two transition types have previously been mentioned in the existing literature on gibbon brachiation. In the current study, we used three-dimensional video and force analysis to describe and characterize these four step-to-step transition types. Results show that, although individual preference occurs, the brachiation strides characterized by each transition type are mainly associated with speed. Yet, these four transitions seem to form a continuum rather than four distinct types. Energy recovery and collision fraction are used as estimators of mechanical efficiency of brachiation and, remarkably, these parameters do not differ between strides with different transition types. All strides show high energy recoveries (mean = 70±11.4%) and low collision fractions (mean = 0.2±0.13), regardless of the step-to-step transition type used. We conclude that siamangs have efficient means of modifying locomotor speed during continuous contact brachiation by choosing particular step-to-step transition types, which all minimize collision fraction and enhance energy recovery.
在臂荡运动中,主要区分两种步态,弹射式臂荡和连续接触臂荡。在弹射式臂荡中,存在一个飞行阶段,身体质心(bCOM)描述出抛物线轨迹。对于连续接触臂荡,至少有一只手始终与基质接触,我们在之前的一篇论文中表明,存在四种步步过渡类型。我们将这些过渡类型称为“点”、“环”、“反向摆荡”和“抛物线”过渡。仅前两种过渡类型在现有的关于长臂猿臂荡的文献中被提到过。在当前的研究中,我们使用三维视频和力分析来描述和表征这四种步步过渡类型。结果表明,尽管存在个体偏好,但每种过渡类型所特征化的臂荡步主要与速度相关。然而,这四种过渡似乎形成了一个连续体,而不是四种不同的类型。能量回收和碰撞分数被用作臂荡运动力学效率的估计量,值得注意的是,这些参数在不同过渡类型的步幅之间没有差异。所有步幅都显示出高的能量回收(平均值=70±11.4%)和低的碰撞分数(平均值=0.2±0.13),无论使用哪种步步过渡类型。我们得出结论,猩猩通过选择特定的步步过渡类型,高效地改变连续接触臂荡中的运动速度,从而最小化碰撞分数并提高能量回收。