Department of Ophthalmology and Visual Science, Seoul St Mary's Hospital, College of Medicine, The Catholic University of Korea, Seoul, Korea.
Ophthalmology. 2013 May;120(5):978-83. doi: 10.1016/j.ophtha.2012.10.015. Epub 2013 Jan 21.
The current study investigated the internal structure of blebs using anterior-segment optical coherence tomography (AS-OCT) in patients who had undergone Ahmed glaucoma valve (AGV) (New World Medical Inc, Rancho Cucamonga, CA) implantation and compared the differences between successful and failed surgeries.
Cross-sectional, observational study.
A total of 76 patients who had undergone AGV implantation.
The blebs after AGV implantation were examined using AS-OCT. The relationship between intraocular pressure (IOP) or the number of glaucoma medications and intrableb parameters was evaluated. Success was defined as IOP ≤ 21 mmHg with a maximum of 2 glaucoma medications, and the remaining cases were assigned to the "failed surgery group." Logistic regression was used to determine the predictive value of various bleb parameters measured by AS-OCT for bleb success.
The bleb wall thickness (minimum and maximum) and the reflectivity of the bleb wall (mean, modal value, minimum, and maximum).
Blebs from 46 successful (60.5%) and 30 failed (39.5%) AGV implantation surgeries were analyzed. The AS-OCT imaging of the intrableb configuration revealed a relatively regular surface and a homogeneous and hyperreflective bleb wall. The maximum and minimum bleb wall thicknesses were significantly different between the 2 groups (P<0.001, P<0.005). No significant differences were observed between the 2 groups in mean, modal, maximum, or minimum reflectivity of the bleb wall. The maximum and minimum bleb wall thicknesses were significantly correlated with the postoperative maximum IOP (r = 0.402, P<0.001; r = 0.280, P = 0.014). The maximum and minimum bleb wall thicknesses showed a significant correlation with the number of postoperative glaucoma eye drops (r = 0.452, P<0.001; r = 0.327, P = 0.004). Maximum bleb wall thickness was significantly associated with the success of AGV surgery by multivariate analysis (P<0.001).
Anterior-segment OCT can be used for bleb imaging after glaucoma valve implantation. The AS-OCT results revealed that the maximum bleb wall was significantly thinner in successful AGV implant surgeries compared with unsuccessful AGV implant surgeries. This technique may facilitate the investigation of surgical outcomes and pathogenesis in patients receiving glaucoma valve implants.
FINANCIAL DISCLOSURE(S): The author(s) have no proprietary or commercial interest in any materials discussed in this article.
本研究使用眼前节光学相干断层扫描(AS-OCT)观察接受 Ahmed 青光眼引流阀(AGV)(New World Medical Inc,Rancho Cucamonga,CA)植入术患者的滤过泡内部结构,并比较手术成功与失败患者的滤过泡差异。
横断面、观察性研究。
共 76 例接受 AGV 植入术的患者。
使用 AS-OCT 检查 AGV 植入术后的滤过泡。评估眼内压(IOP)或青光眼药物数量与滤过泡内参数之间的关系。成功定义为 IOP≤21mmHg,最多使用 2 种青光眼药物,其余病例归入“手术失败组”。使用 logistic 回归确定 AS-OCT 测量的各种滤过泡参数对滤过泡成功的预测价值。
滤过泡壁厚度(最小和最大)和滤过泡壁反射率(平均值、模态值、最小值和最大值)。
分析了 46 例(60.5%)手术成功和 30 例(39.5%)手术失败的 AGV 植入术滤过泡。通过 AS-OCT 成像观察到的滤过泡内部形态表现为相对规则的表面和均匀且高反射的滤过泡壁。两组间最大和最小滤过泡壁厚度差异均有统计学意义(P<0.001,P<0.005)。两组间滤过泡壁的平均、模态、最大和最小反射率无显著差异。最大和最小滤过泡壁厚度与术后最大 IOP 显著相关(r=0.402,P<0.001;r=0.280,P=0.014)。最大和最小滤过泡壁厚度与术后青光眼滴眼液数量也显著相关(r=0.452,P<0.001;r=0.327,P=0.004)。多因素分析显示最大滤过泡壁厚度与 AGV 手术的成功显著相关(P<0.001)。
眼前节 OCT 可用于青光眼阀植入术后的滤过泡成像。AS-OCT 结果显示,与手术失败的滤过泡相比,AGV 植入术成功的滤过泡最大壁厚度显著变薄。该技术可能有助于研究接受青光眼阀植入患者的手术结果和发病机制。
作者无本文讨论的材料相关的专有或商业利益。