Smerup M, Partridge J, Agger P, Ringgaard S, Pedersen M, Petersen S, Hasenkam J M, Niederer P, Lunkenheimer P P, Anderson R H
Department of Cardiothoracic and Vascular Surgery, Aarhus University Hospital Skejby, Aarhus, Denmark.
Technol Health Care. 2013;21(1):63-79. doi: 10.3233/THC-120710.
Left ventricular myocytes are arranged in a complex three-dimensional mesh. Since all myocytes contract approximately to the same degree, mechanisms must exist to enable force transfer from each of these onto the framework as a whole, despite the transmural differences in deformation strain. This process has hitherto not been clarified in detail.
To present a geometrical model that establishes a mechanical link between the three-dimensional architecture and the function of the left ventricular myocardium.
The left ventricular equator was modeled as a cylindrical tube of deformable but incompressible material, composed of virtual cardiomyocytes with known diastolic helical and transmural angles. By imposing reference circumferential, longitudinal, and torsional strains onto the model, we created a three-dimensional deformation field to calculate passive shortening of the myocyte surrogates. We tested two diastolic architectures: 1) a simple model with longitudinal myocyte surrogates in the endo- and epicardium, and circular ones in the midwall, and 2) a more accurate architecture, with progressive helical angle distribution varying from -60° in the epicardium to 60° in the endocardium, with or without torsion and transmural cardiomyocyte angulation.
The simple model caused great transmural unevenness in cardiomyocyte shortening; longitudinal surrogates shortened by 15% at all depths equal to the imposed longitudinal strain, whereas circular surrogates exhibited a maximum shortening of 23.0%. The accurate model exhibited a smooth transmural distribution of cardiomyocyte shortening, with a mean (range) of 17.0 (13.2-20.8)%. Torsion caused a shortening of 17.0 (15.2-18.9)% and transmural angulation caused a shortening of 15.2 (12.4-18.2)%. Combining the effects of transmural angulation and torsion caused a change of 15.2 (13.2-16.5)%.
A continuous transmural distribution of the helical angle is obligatory for smooth shortening of the cardiomyocytes, but a combination of torsional and transmural angulation changes is necessary to execute systolic mural thickening whilst keeping shortening of the cardiomyocytes within its physiological range.
左心室心肌细胞排列成复杂的三维网格结构。由于所有心肌细胞的收缩程度大致相同,因此尽管变形应变存在透壁差异,但必然存在一些机制,使每个心肌细胞产生的力能够传递到整个心肌框架上。迄今为止,这一过程尚未得到详细阐明。
提出一个几何模型,该模型能在左心室心肌的三维结构与其功能之间建立力学联系。
将左心室赤道面建模为一个由可变形但不可压缩材料制成的圆柱形管,该管由具有已知舒张期螺旋角和透壁角的虚拟心肌细胞组成。通过对模型施加参考圆周应变、纵向应变和扭转应变,我们创建了一个三维变形场,以计算心肌细胞替代物的被动缩短情况。我们测试了两种舒张期结构:1)一种简单模型,内膜和外膜中有纵向心肌细胞替代物,中层壁中有环形替代物;2)一种更精确的结构,螺旋角呈渐进式分布,从外膜的-60°到内膜的60°,有或没有扭转和透壁心肌细胞角度变化。
简单模型导致心肌细胞缩短出现极大的透壁不均匀性;纵向替代物在所有深度处缩短15%,等于施加的纵向应变,而环形替代物的最大缩短率为23.0%。精确模型显示心肌细胞缩短呈平滑的透壁分布,平均(范围)为17.0(13.2 - 20.8)%。扭转导致缩短17.0(15.2 - 18.9)%,透壁角度变化导致缩短15.2(12.4 - 18.2)%。透壁角度变化和扭转效应相结合导致变化15.2(13.2 - 16.5)%。
螺旋角的连续透壁分布对于心肌细胞的平滑缩短是必不可少的,但扭转和透壁角度变化的组合对于实现收缩期壁增厚同时将心肌细胞缩短保持在其生理范围内是必要的。