Jiangsu Key Laboratory of Advanced Functional Polymer Design and Application, Department of Polymer Science and Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, PR China.
ACS Appl Mater Interfaces. 2013 Feb;5(4):1453-9. doi: 10.1021/am302925s. Epub 2013 Feb 15.
Organic ionic plastic crystal, 1-propyl-1-methylpyrrolidinium iodide (P₁₃I), which possesses a broad plastic phase from -36 to 135 °C, was doped with silica nanoparticles (SiO₂ NPs) and 1-ethyl-3-methylimidazolium iodide (EMII), for the preparation of SiO₂/EMII/P₁₃I solid-state electrolytes for dye-sensitized solar cells (DSSCs). The thermal properties of all the electrolytes, including solid-solid phase transitions and melting temperatures, were investigated by differential scanning calorimetry (DSC). The effect of silica particles on the ionic conductivity, diffusion of I⁻/I₃⁻ redox couple in electrolytes, and photovoltaic performance for solid-state DSSCs were investigated. The fabricated solid-state DSSCs yielded a high power conversion efficiency of 5.25% under simulated air mass 1.5 solar spectrum illuminations at 50 mW cm⁻². Furthermore, the DSSCs based on SiO₂/EMII/P₁₃I solid-state electrolytes show good stability after an accelerating aging test, demonstrating potential practical applications.
有机离子塑料晶体 1-丙基-1-甲基吡咯烷碘化物(P₁₃I)具有从-36°C 到 135°C 的宽塑性相,被掺杂了二氧化硅纳米颗粒(SiO₂ NPs)和 1-乙基-3-甲基咪唑碘化物(EMII),用于制备用于染料敏化太阳能电池(DSSCs)的 SiO₂/EMII/P₁₃I 固态电解质。所有电解质的热性能,包括固-固相变和熔融温度,通过差示扫描量热法(DSC)进行了研究。考察了二氧化硅颗粒对电解质中 I⁻/I₃⁻氧化还原对离子电导率和扩散的影响,以及固态 DSSCs 的光伏性能。在模拟空气质量 1.5 太阳光谱下,在 50 mW cm⁻² 的光强下,制备的固态 DSSCs 的功率转换效率高达 5.25%。此外,基于 SiO₂/EMII/P₁₃I 固态电解质的 DSSCs 在加速老化测试后表现出良好的稳定性,显示出潜在的实际应用。