Hefei National Laboratory for Physical Sciences at Microscale and Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026, China.
Inorg Chem. 2013 Apr 1;52(7):3814-22. doi: 10.1021/ic302436k. Epub 2013 Mar 12.
A series of nitrogen-containing inorganic solid compounds with variable oxidation states of nitrogen and counter ions have been successfully applied as new inorganic solid nitrogen sources toward the synthesis of Sc-based metal nitride clusterfullerenes (Sc-NCFs), including ammonium salts [(NH4)xH(3-x)PO4 (x = 0-2), (NH4)2SO4, (NH4)2CO3, NH4X (X = F, Cl), NH4SCN], thiocyanate (KSCN), nitrates (Cu(NO3)2, NaNO3), and nitrite (NaNO2). Among them, ammonium phosphates ((NH4)xH(3-x)PO4, x = 1-3) and ammonium thiocyanate (NH4SCN) are revealed to behave as better nitrogen sources than others, and the highest yield of Sc-NCFs is achieved when NH4SCN was used as a nitrogen source. The optimum molar ratio of Sc2O3:(NH4)3PO4·3H2O:C and Sc2O3:NH4SCN:C has been determined to be 1:2:15 and 1:3:15, respectively. The thermal decomposition products of these 12 inorganic compounds have been discussed in order to understand their different performances toward the synthesis of Sc-NCFs, and accordingly the dependence of the production yield of Sc-NCFs on the oxidation state of nitrogen and counter ion is interpreted. The yield of Sc3N@C80 (I(h) + D(5h)) per gram Sc2O3 by using the N2-based group of nitrogen sources (thiocyanate, nitrates, and nitrite) is overall much lower than those by using gaseous N2 and NH4SCN, indicating the strong dependence of the yield of Sc-NCFs on the oxidation state of nitrogen, which is attributed to the "in-situ" redox reaction taking place for the N2-based group of nitrogen sources during discharging. For NH3-based group of nitrogen sources (ammonium salts) which exhibits a (-3) oxidation states of nitrogen, their performance as nitrogen sources is found to be sensitively dependent on the anion, and this is understood by considering their difference on the thermal stability and/or decomposition rate. Contrarily, for the N2-based group of nitrogen sources, the formation of Sc-NCFs is independent to both the oxidation state of nitrogen (+3 or +5) and the cation.
一系列具有可变氧化态氮和抗衡离子的含氮无机固体化合物已成功应用于新型无机固体氮源,用于合成基于 Sc 的金属氮化物团簇富勒烯(Sc-NCFs),包括铵盐[(NH4)xH(3-x)PO4(x=0-2),(NH4)2SO4,(NH4)2CO3,NH4X(X=F,Cl),NH4SCN],硫氰酸盐(KSCN),硝酸盐(Cu(NO3)2,NaNO3)和亚硝酸盐(NaNO2)。其中,发现磷酸铵((NH4)xH(3-x)PO4,x=1-3)和硫氰酸铵(NH4SCN)作为氮源的性能优于其他氮源,当使用硫氰酸铵作为氮源时,Sc-NCFs 的产率最高。已经确定了 Sc2O3:(NH4)3PO4·3H2O:C 和 Sc2O3:NH4SCN:C 的最佳摩尔比分别为 1:2:15 和 1:3:15。讨论了这 12 种无机化合物的热分解产物,以便了解它们在合成 Sc-NCFs 方面的不同性能,并据此解释了 Sc-NCFs 产量对氮的氧化态和抗衡离子的依赖性。使用基于 N2 的氮源(硫氰酸盐,硝酸盐和亚硝酸盐),每克 Sc2O3 生成 Sc3N@C80(I(h)+D(5h))的产率总体上远低于使用气态 N2 和硫氰酸铵的产率,这表明 Sc-NCFs 的产率强烈依赖于氮的氧化态,这归因于 N2 基氮源在放电过程中发生的“原位”氧化还原反应。对于具有(-3)氧化态氮的基于 NH3 的氮源(铵盐),发现它们作为氮源的性能对阴离子非常敏感,这可以通过考虑它们在热稳定性和/或分解速率上的差异来理解。相反,对于基于 N2 的氮源,Sc-NCFs 的形成与氮的氧化态(+3 或+5)和阳离子无关。