Department of Chemistry, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016, India.
J Phys Chem B. 2013 May 2;117(17):5230-40. doi: 10.1021/jp402113s. Epub 2013 Apr 17.
Depending on the solubilizing milieu and conditions, fluorescein may exist in one or more of its many prototropic forms [cationic, neutral (zwitterionic, quinoid, and lactone), monoanionic (phenolate and carboxylate), and dianionic]. Fluorescein prototropism is investigated in liquid poly(ethylene glycol)s (PEGs) of different average molecular weight (MW) and their aqueous mixtures using UV-vis absorbance along with static and time-resolved fluorescence spectroscopic techniques. Information regarding various prototropic forms of fluorescein in up to 30 wt % different average MW PEG-added aqueous buffers at varying pH reveals that addition of PEG causes lactonization of fluorescein in the milieu; higher the average MW of PEG, the more the lactonization is. Neat PEG200, PEG400, and PEG600 are found to support the dianionic form of fluorescein, while PEG1000 supports the neutral lactonized form. It is demonstrated that various prototropic forms of fluorescein may be generated within PEGs by addition of adequate amounts of acidic aqueous buffer. Significant bathochromic shift in absorbance and fluorescence band maxima of dianionic fluorescein as concentration of PEG200 is increased correlates well with hydrogen bond accepting basicity, hydrogen bond donating acidity, and dipolarity/polarizability of the aqueous PEG200 mixture. Interestingly, fluorescence emission from the cationic form of fluorescein is observed from dilute aqueous acidic media in the presence of high concentration of PEG200, whereas the fluorescence emission from cation in the absence of PEG200 is observed only from aqueous solutions of very high acidity (>5 M [H(+)]). Excited-state intensity decay is also used to support this outcome. It is proposed that, in the presence of a small amount of acid in PEG200, a highly acidic water-rich solvation microenvironment is formed around fluorescein, which converts its dianionic form to cationic form and considerably hinders the rapid deprotonation of the excited state of the cationic form.
根据增溶环境和条件的不同,荧光素可能以其多种质子化形式之一存在[阳离子、中性(两性离子、醌式和内酯)、单阴离子(酚盐和羧酸盐)和双阴离子]。使用紫外-可见吸收光谱以及静态和时间分辨荧光光谱技术,研究了不同平均分子量(MW)的液体聚乙二醇(PEG)及其水溶液中荧光素的原质子化。在不同 pH 值的高达 30wt%不同平均 MW PEG 加水电缓冲液中,关于荧光素各种原质子化形式的信息表明,PEG 的添加导致了荧光素在介质中的内酯化;PEG 的平均 MW 越高,内酯化程度越高。发现纯 PEG200、PEG400 和 PEG600 支持荧光素的双阴离子形式,而 PEG1000 支持中性内酯化形式。证明通过添加适量的酸性水缓冲液,可以在 PEG 中生成各种原质子化形式的荧光素。随着 PEG200 浓度的增加,二价荧光素的吸收和荧光带极大值发生显著的红移,这与水 PEG200 混合物的氢键接受碱性、氢键给酸性以及偶极/极化率很好地相关。有趣的是,在高浓度 PEG200 存在下,从稀酸性水介质中观察到阳离子形式的荧光素的荧光发射,而在没有 PEG200 的情况下,仅从非常高酸度(>5M[H+])的水溶液中观察到阳离子的荧光发射。激发态强度衰减也用于支持这一结果。据推测,在 PEG200 中存在少量酸时,在荧光素周围形成高度酸性的富含水的溶剂化微环境,这将其双阴离子形式转化为阳离子形式,并极大地阻碍了阳离子形式的激发态的快速去质子化。