Department of Food Science, University of Guelph, Guelph, Ontario Canada N1G2W1.
Physiol Mol Biol Plants. 2011 Apr;17(2):105-14. doi: 10.1007/s12298-011-0056-8. Epub 2011 Apr 20.
The acceptability of potatoes for processing chips and French fries is largely dependent on the color of the finished product. Most potato cultivars and varieties stored at temperatures below 9-10 °C are subjected to low temperature sweetening (LTS) which result in the production of bitter-tasting, dark colored chips and French fries which are unacceptable to consumers. However, storing tubers at low temperatures (i.e., <10 °C) has many advantages such as lowered weight loss during storage, natural control of sprouting, and reduction/elimination of chemical sprout inhibitors. Our earlier research results on LTS suggested a role for pyruvate decarboxylase (PDC) in LTS-tolerance. In the present study, the role of PDC was examined whereby the potato variety Snowden was transformed with Arabidopsis cold-inducible pyruvate decarboxylase gene 1 (AtPDC1) under the control of promoter rd29A. Two transgenic plants were selected and storage studies were conducted on tubers harvested from one of the transgenic lines grown under green house conditions. Transgenic tubers showed higher Agtron chip color score indicating lighter chip and lower reducing sugar and sucrose concentrations compared to the untransformed tubers during the storage periods studied at 12 °C and 5 °C. These results suggest that overexpression of pyruvate decarboxylase gene resulted in low temperature sweetening tolerance in the transgenic Snowden.
用于加工薯片和薯条的土豆的可接受性在很大程度上取决于成品的颜色。大多数在低于 9-10°C 的温度下储存的土豆品种和品种都会经历低温糖化(LTS),这会导致产生苦味、深色的薯片和薯条,不受消费者欢迎。然而,将块茎储存在低温下(即<10°C)有许多优点,例如在储存过程中失重降低、自然控制发芽和减少/消除化学发芽抑制剂。我们之前关于 LTS 的研究结果表明,丙酮酸脱羧酶(PDC)在 LTS 耐受性中起作用。在本研究中,检查了 PDC 的作用,方法是在 rd29A 启动子的控制下,将拟南芥冷诱导丙酮酸脱羧酶基因 1(AtPDC1)转化为 Snowden 马铃薯品种。选择了两个转基因植株,并对在温室条件下生长的一个转基因系收获的块茎进行了储存研究。与未转化的块茎相比,转基因块茎在研究的 12°C 和 5°C 储存期间表现出更高的 Agtron 薯片颜色评分,表明薯片颜色更浅,还原糖和蔗糖浓度更低。这些结果表明,丙酮酸脱羧酶基因的过表达导致转基因 Snowden 对低温糖化具有耐受性。