Suppr超能文献

定制足弓支撑鞋垫对旋前足型下肢运动学和动力学的剂量反应效应。

Dose-response effects of customised foot orthoses on lower limb kinematics and kinetics in pronated foot type.

机构信息

Institute for Applied Health Research, School of Health and Life Sciences, Glasgow Caledonian University, UK.

出版信息

J Biomech. 2013 May 31;46(9):1489-95. doi: 10.1016/j.jbiomech.2013.03.036. Epub 2013 Apr 28.

Abstract

Despite the widespread use of customised foot orthoses (FOs) for the pronated foot type there is a lack of reliable information on the dose-response effect on lower limb mechanics. This study investigated these effects in subjects with normal and pronated foot types. Customised FOs were administered to 12 participants with symptomatic pronated foot type and 12 age and gender matched controls. A computer-aided design (CAD) software was used to design nine FOs per participant with dose incrementally changed by varying only the rearfoot post angle. This was done in 2° increments from 6° lateral to 10° medial posting. A 3D printing method was used to manufacture the FOs. Quantification of the dose-response effect was performed using three-dimensional gait analyses for selected rearfoot and knee kinematics and kinetics. Under these experimental conditions, significant and linear effects of posting were seen for the peak (p<0.001) and mean (p<0.001) rearfoot eversions, peak (p=0.003) and mean (p<0.001) ankle eversion moments and peak (p=0.017) and mean (p=0.005) knee adduction moment variables. Group effects were observed for the peak (p=0.007) and mean (p=0.007) forefoot abduction and for the peak (p=0.007) knee adduction moment. A significant interaction between posting and group was seen for internal tibial rotation (p=0.004). These data indicate that a dose-response effect, with a linear trend for both the rearfoot and knee, exists for customised FOs used to treat pronated foot type.

摘要

尽管针对内翻足类型已经广泛使用了定制足垫(FO),但关于其对下肢力学的剂量反应效应仍缺乏可靠信息。本研究调查了正常足和内翻足类型的受试者的这些效应。将定制 FO 施加于 12 名有症状的内翻足类型患者和 12 名年龄和性别匹配的对照者。使用计算机辅助设计(CAD)软件为每位参与者设计了 9 个 FO,通过仅改变后足后倾角来逐步改变剂量。从 6°外侧到 10°内侧的后足后倾角以 2°的增量进行改变。使用 3D 打印方法制造 FO。使用三维步态分析来量化选定的后足和膝关节运动学和动力学的剂量反应效应。在这些实验条件下,后足外旋的峰值(p<0.001)和平均值(p<0.001)、峰值(p=0.003)和平均值(p<0.001)的踝关节外翻力矩以及峰值(p=0.017)和平均值(p=0.005)的膝关节内收力矩变量都出现了明显的和线性的后足后倾效应(p<0.001)。观察到组间效应的变量包括峰值(p=0.007)和平均值(p=0.007)的前足外展以及峰值(p=0.007)的膝关节内收力矩。在后足内旋(p=0.004)方面观察到后足后倾和组间的显著交互作用。这些数据表明,用于治疗内翻足类型的定制 FO 存在剂量反应效应,后足和膝关节都呈现线性趋势。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验