Fritzsche G
Int J Comput Dent. 2013;16(1):59-67.
This case report demonstrates how two opposing teeth were restored with full crowns using Cerec software version 4.2 (pre-release version). In addition, an anterior tooth was provided with a veneer. The situation was scanned with the Cerec Omnicam. The new virtual articulator was used for the design to obtain correct dynamic contacts. The Cerec Omnicam can scan the entire situation prior to preparation without the help of an assistant, as no surface pretreatment is necessary. The locations of the occlusal contacts can be marked with articulating paper and are indicated on the virtual models. Selective deletion of individual areas allows the prepared teeth to be rescanned, considerably speeding up the workflow. A video demonstration is available of the acquisition and design procedure.
本病例报告展示了如何使用Cerec软件版本4.2（预发布版本）为两颗对颌牙制作全冠修复体。此外，还为一颗前牙制作了贴面。使用Cerec Omnicam扫描仪对情况进行了扫描。在设计过程中使用了新型虚拟牙合架以获得正确的动态接触关系。Cerec Omnicam无需助手协助，在牙体预备前即可扫描整个情况，因为无需进行表面预处理。咬合接触点的位置可用咬合纸标记，并在虚拟模型上显示。通过选择性删除个别区域，可以对预备后的牙齿重新扫描，大大加快了工作流程。有关于采集和设计过程的视频演示。
