Pacific Northwest National Laboratory, Richland, WA 99354, United States.
J Contam Hydrol. 2013 Oct;153:122-40. doi: 10.1016/j.jconhyd.2012.02.003. Epub 2012 Mar 3.
A large set of sediment samples from a 1600 m² experimental plot within a 2.2 km² vadose zone and groundwater uranium (VI) plume was subject to physical, chemical, and mineralogic characterization. The plot is being used for field experimentation on U(VI) recharge and transport processes within a persistent groundwater plume that exists in the groundwater-river interaction zone of the Columbia River at the U.S. DOE Hanford site. The samples were obtained during the installation of 35 tightly spaced (10 m separation) groundwater monitoring wells. The characterization measurements for each sample included total contaminant concentrations (U and Cu primarily), bicarbonate extractable U(VI), sequential ²³⁸U(VI) contaminant desorption Kd, ²³³U(VI) adsorption K(d), grain size distribution, surface area, extractable poorly crystalline Fe(III) oxides, and mineralogy. The characterization objective was to inform a conceptual model of coupled processes controlling the anomalous longevity of the plume, and to quantify the spatial heterogeneity of the contaminant inventory and the primary properties effecting reactive transport. Correlations were drawn between chemical, physical, and reaction properties, and Gaussian simulation was used to compute multiple 3-D realizations of extractable U(VI), the ²³³U(VI) adsorption K(d), and the distribution of the reactive <2 mm fraction. Adsorbed contaminant U(VI) was highest in the vadose zone and the zone of seasonal water table fluctuation lying at its base. Adsorbed U(VI) was measureable, but low, in the groundwater plume region where very high hydraulic conductivities existed. The distribution of adsorbed U(VI) displayed no apparent correlation with sediment physical or chemical properties. Desorption [²³⁸U(IV)] and adsorption [²³³U(VI)] K(d) values showed appreciable differences due to mass transfer controlled surface complexation and the effects of long subsurface residence times. The ²³³U(VI) adsorption K(d), a combined measure of surface complexation strength and site concentration, was relatively uniform throughout the domain, displaying correlation with fines distribution and surface area. The characterization results revealed U(VI) supplied to the groundwater plume through spatially heterogeneous recharge from residual contamination in the zone of seasonal water table fluctuation, and transport of U(VI) controlled by weak, kinetically-controlled surface complexation in the coarse-textured saturated zone. Geostatistical relationships for the adsorbed contaminant U distribution in the characterization domain allow an extrapolation to inventory at the plume scale, a critical unknown for remedial action.
对一个 2.2 平方公里的包气带和地下水铀 (VI) 羽流内的 1600 平方米实验区域的大量沉积物样本进行了物理、化学和矿物学特征描述。该区域正在用于美国能源部汉福德现场地下水-河流相互作用区持续存在的地下水羽流中铀 (VI) 补给和运移过程的野外实验。这些样本是在安装 35 个紧密间隔(间隔 10 米)地下水监测井时获得的。每个样本的特征测量包括总污染物浓度(主要为 U 和 Cu)、碳酸氢盐可提取 U(VI)、顺序 ²³⁸U(VI)污染物解吸 Kd、²³³U(VI)吸附 K(d)、粒度分布、表面积、可提取的弱结晶 Fe(III)氧化物和矿物学。特征描述的目的是为控制羽流异常持久的耦合过程提供一个概念模型,并量化污染物库存的空间异质性和影响反应传输的主要性质。对化学、物理和反应性质进行了相关性分析,并使用高斯模拟计算了可提取 U(VI)、²³³U(VI)吸附 K(d)和反应性<2 毫米级分的分布的多个 3-D 实现。在包气带和位于其底部的季节性地下水位波动带中,吸附的污染物 U(VI) 含量最高。在地下水羽流区域存在极高水力传导率的情况下,可测量到但含量较低的吸附 U(VI)。吸附 U(VI)的分布与沉积物的物理或化学性质没有明显的相关性。解吸[²³⁸U(IV)]和吸附[²³³U(VI)]K(d)值由于受质量转移控制的表面络合作用和长时间地下停留时间的影响而存在明显差异。²³³U(VI)吸附 K(d)是表面络合强度和点位浓度的综合衡量指标,在整个区域内相对均匀,与细粒分布和表面积相关。特征描述结果表明,通过季节性地下水位波动带中残留污染的空间异质补给向地下水羽流提供 U(VI),并通过粗质地层中弱的、动力学控制的表面络合作用控制 U(VI)的运移。特征描述区域内吸附污染物 U 分布的地质统计学关系允许外推到羽流尺度的库存,这是补救行动的一个关键未知因素。