Suppr超能文献

Ahmed青光眼阀植入术后角膜缘巩膜隧道与引流管之间接触紧密性的评估。

Evaluation of the tightness of contact between 
limbal sclera tunnel and tube following Ahmed 
glaucoma valve implantation.

作者信息

Holló Gábor, Naghizadeh Farzaneh

机构信息

Department of Ophthalmology, Semmelweis University, Budapest - Hungary.

出版信息

Eur J Ophthalmol. 2013 Nov-Dec;23(6):905-8. doi: 10.5301/ejo.5000320. Epub 2013 May 27.

Abstract

PURPOSE

To investigate whether the tightness of contact between the tube and the limbal sclera tunnel can be evaluated with high-magnification anterior segment optical coherence tomography (OCT) imaging following Ahmed glaucoma valve implantation.

METHODS

Tightness between the tube and the limbal sclera tunnel was investigated with the CAM-L cornea lens adapter of the Optovue Fourier-domain OCT (RTVue-OCT) for 21 uncomplicated Ahmed glaucoma valves implanted in 20 eyes of 19 patients with glaucoma. Nineteen valves were implanted 4 to 124 months earlier (late postoperative cases) and 2 valves 1 day prior to the imaging (early postoperative cases). All valves were introduced into the anterior chamber via a limbal sclera tunnel.

RESULTS: The limbal intratunnel part of the tube was successfully imaged in all but 2 cases where an additional full-thickness sclera patch was used. In 14 cases, the contact was tight without tube compression. In 
5 cases, the tube was partially compressed but remained open in the limbal sclera tunnel, and redilated behind the limbus. No case with loose contact or peritubular filtration was seen. The posterior run of the tube was successfully imaged in all 19 cases without a full-thickness sclera patch.

CONCLUSION

High-magnification imaging with the CAM- L anterior segment adapter of the RTVue-OCT allows detailed examination of the limbal insertion area of tubes in both the early and late postoperative periods. Therefore this method may potentially be applied for detection of complications related to tube insertion after glaucoma drainage device surgery.

摘要

目的

研究在植入艾哈迈德青光眼引流阀后,能否通过高倍眼前节光学相干断层扫描(OCT)成像评估引流管与角膜缘巩膜隧道之间的贴合紧密程度。

方法

使用Optovue傅里叶域OCT(RTVue - OCT)的CAM - L角膜透镜适配器,对19例青光眼患者20只眼中植入的21个未发生并发症的艾哈迈德青光眼引流阀,研究引流管与角膜缘巩膜隧道之间的贴合紧密程度。其中19个引流阀在成像前4至124个月植入(术后晚期病例),2个引流阀在成像前1天植入(术后早期病例)。所有引流阀均通过角膜缘巩膜隧道置入前房。

结果

除2例使用额外全层巩膜补片的病例外,其余病例均成功对引流管在角膜缘隧道内的部分进行了成像。14例中,贴合紧密,引流管未受压。5例中,引流管部分受压,但在角膜缘巩膜隧道内仍保持开放,并在角膜缘后重新扩张。未见贴合疏松或管周滤过的病例。在所有19例未使用全层巩膜补片的病例中,均成功对引流管的后部进行了成像。

结论

使用RTVue - OCT的CAM - L眼前节适配器进行高倍成像,可在术后早期和晚期详细检查引流管在角膜缘的植入区域。因此,该方法可能潜在地应用于青光眼引流装置手术后与引流管植入相关并发症的检测。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验