Suppr超能文献

含能材料 HMX 中空洞缺陷的分子动力学模拟。

Molecular dynamics simulations of void defects in the energetic material HMX.

机构信息

State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials, Southwest University of Science and Technology, Mianyang, 621010, People's Republic of China.

出版信息

J Mol Model. 2013 Sep;19(9):3893-9. doi: 10.1007/s00894-013-1924-7. Epub 2013 Jul 5.

Abstract

A molecular dynamics (MD) simulation was carried out to characterize the dynamic evolution of void defects in crystalline octahydro-1, 3, 5, 7-tetranitro-1, 3, 5, 7-tetrazocine (HMX). Different models were constructed with the same concentration of vacancies (10 %) to discuss the size effects of void. Energetic ground state properties were determined by annealing simulations. The void formation energy per molecule removed was found to be 55-63 kcal/mol(-1), and the average binding energy per molecule was between 32 and 34 kcal/mol(-1) according to the change in void size. Voids with larger size had lower formation energy. Local binding energies for molecules directly on the void surface decreased greatly compared to those in defect-free lattice, and then gradually increased until the distance away from the void surface was around 10 Å. Analysis of 1 ns MD simulations revealed that the larger the void size, the easier is void collapse. Mean square displacements (MSDs) showed that HMX molecules that had collapsed into void present liquid structure characteristics. Four unique low-energy conformers were found for HMX molecules in void: two whose conformational geometries corresponded closely to those found in HMX polymorphs and two, additional, lower energy conformers that were not seen in the crystalline phases. The ratio of different conformers changed with the simulated temperature, in that the ratio of α conformer increased with the increase in temperature.

摘要

采用分子动力学(MD)模拟方法研究了八氢-1,3,5,7-四硝基-1,3,5,7-四氮杂环辛烷(HMX)中空洞缺陷的动态演化过程。构建了不同尺寸空洞浓度(10%)的模型,以讨论空洞的尺寸效应。通过退火模拟确定了体系的能量基态性质。发现每移除一个分子的空洞形成能为 55-63 kcal/mol(-1),根据空洞尺寸的变化,平均每个分子的结合能在 32-34 kcal/mol(-1)之间。尺寸较大的空洞具有较低的形成能。与无缺陷晶格中分子的直接结合能相比,位于空洞表面的分子的局部结合能大大降低,然后逐渐增加,直到距离空洞表面约 10 Å。对 1 ns MD 模拟的分析表明,空洞尺寸越大,空洞塌陷越容易。均方根位移(MSD)表明,坍塌到空洞中的 HMX 分子具有液体结构特征。在空洞中发现了 HMX 分子的四个独特的低能量构象:两个构象与 HMX 多晶型物中的构象非常相似,另外两个则是具有更低能量的构象,在晶体相中没有出现。不同构象的比例随模拟温度而变化,其中α构象的比例随温度的升高而增加。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验