School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798.
J Acoust Soc Am. 2013 Aug;134(2):1683-94. doi: 10.1121/1.4812895.
High-intensity focused ultrasound (HIFU) is emerging as an effective therapeutic modality in both thermal ablations for solid tumor/cancer and soft-tissue fragmentation. Mechanical and thermal effects, which play an important role in the HIFU treatment simultaneously, are dependent on the operating parameters and may vary with the progress of therapy. Mechanical erosion in the shape of a "squid," a "dumbbell" lesion with both mechanical and thermal lesions, or a "tadpole" lesion with mechanical erosion at the center and thermal necrosis on the boundary in the transparent gel phantom could be produced correspondingly with the pulse duration of 5-30 ms, which is much longer than histotripsy burst but shorter than the time for tissue boiling, and pulse repetition frequency (PRF) of 0.2-5 Hz. Meanwhile, variations of bubble cavitation (both inertial and stable cavitation) and temperature elevation in the focal region (i.e., z = -2.5, 0, and 2.5 mm) were measured by passive cavitation detection (PCD) and thermocouples during the therapeutic procedure, respectively. Stable cavitation increased with the pulse duration, PRF, and the number of pulses delivered. However, inertial cavitation was found to increase initially and then decrease with long pulse duration and high PRF. Temperature in the pre-focal region is always higher than those at the focal and post-focal position in all tests. Great variations of PCD signals and temperature elevation are due to the generation and persistence of large bubble, which is resistant to collapse and occurs with the increase of pulse duration and PRF. Similar lesion pattern and variations were also observed in ex vivo porcine kidneys. Hyperechoes in the B-mode ultrasound image were comparable to the shape and size of lesions in the dissected tissue. Thermal lesion volume increased with the increase of pulse duration and PRF, but mechanical erosion reached its maximum volume with the pulse duration of 20 ms and PRF of 1 Hz. Altogether, bubble cavitation and thermal field vary with the progress of HIFU treatment with different sonication parameters, which provide insights into the interaction of ultrasound burst with the induced bubbles for both soft tissue fractionation and enhancement in thermal accumulation. Appropriate synergy and monitoring of mechanical and thermal effects would broaden the HIFU application and enhance its efficiency as well as safety.
高强度聚焦超声(HIFU)作为一种有效的治疗方式,在实体肿瘤/癌症的热消融和软组织碎裂方面都有应用。在 HIFU 治疗中,机械和热效应同时发挥着重要作用,它们取决于操作参数,并可能随着治疗的进展而变化。在透明凝胶模型中,可以相应地产生具有机械侵蚀作用的“鱿鱼”、同时具有机械和热损伤的“哑铃”状病变,或者中心具有机械侵蚀而边界具有热坏死的“蝌蚪”状病变,其脉冲持续时间为 5-30ms,明显长于 histotripsy 爆发,但短于组织沸腾时间,脉冲重复频率(PRF)为 0.2-5Hz。同时,在治疗过程中,通过被动声空化检测(PCD)和热电偶分别测量了空化泡的变化(惯性空化和稳定空化)和焦域内的温度升高(即 z=-2.5、0 和 2.5mm)。稳定空化随着脉冲持续时间、PRF 和脉冲数的增加而增加。然而,惯性空化最初随着长脉冲持续时间和高 PRF 而增加,然后减少。在所有测试中,前焦区的温度始终高于焦区和后焦区的温度。PCD 信号和温度升高的巨大变化是由于大空化泡的产生和持续存在所致,这种空化泡难以塌陷,随着脉冲持续时间和 PRF 的增加而出现。在离体猪肾中也观察到了类似的病变模式和变化。B 型超声图像中的高回声与解剖组织中的病变形状和大小相当。热损伤体积随脉冲持续时间和 PRF 的增加而增加,但机械侵蚀在脉冲持续时间为 20ms、PRF 为 1Hz 时达到最大体积。总的来说,随着不同超声参数的 HIFU 治疗的进展,空化泡和热场发生变化,这为超声脉冲与诱导空化泡的相互作用提供了深入的了解,有助于软组织碎裂和增强热积累。适当的机械和热效应协同作用和监测将拓宽 HIFU 的应用,并提高其效率和安全性。