Division of Materials, Mechanics and Structures, Faculty of Engineering, University of Nottingham, University Park, Nottingham, NG7 2RD, United Kingdom.
J Mech Behav Biomed Mater. 2013 Dec;28:1-14. doi: 10.1016/j.jmbbm.2013.07.014. Epub 2013 Jul 23.
Completely resorbable composites are an attractive alternative for metallic bone-fracture fixation devices. However, failure of their interfacial integrity within aqueous environments, which can lead to a rapid loss of overall mechanical properties, has been reported in the literature. In this study coupling agents were investigated for phosphate glass fibre reinforced poly(lactic acid) composites. Three coupling agents with varying wettability were employed to improve initial mechanical properties and their retention in vitro via improvement of the interfacial bond between polymer matrix and fibres. Coupling agents were grafted onto the glass fibres by dip-coating in coupling agent solution at optimised concentrations. Three-aminopropyltriethoxy silane and sorbitol ended PLA oligomer treatments improved the initial flexural properties (27% strength with APS and 17% modulus via SPLA treatment) of the composites and 3-aminopropyltriethoxy silane and hexamethylene diisocyanate (HDI) treatments also decreased the loss of flexural strength and modulus during degradation. HDI treated samples retained 57.2% and 64.7% of their initial strength and modulus, respectively compared to control where only 34% of initial strength and 52% of initial modulus was retained after 28 days of degradation in PBS solution. Initial improvements in flexural properties were associated with improved shear bond strength at the interface due to covalent bonding between the glass fibres and polymer matrix provided by the coupling agents. Delay in mechanical property loss with degradation was suggested to be due to the hydrophobicity at the interface, which could have hindered the interfacial integrity loss and consequently loss of mechanical integrity of the composites. All coupling agent treated and control composites were tested for cytocompatibility using a primary human osteoblast cell line. A comparable response to the control, in terms of cell adhesion, proliferation and differentiation was observed supporting the use of these agents within implantable devices.
完全可吸收复合材料是金属骨骨折固定装置的一种有吸引力的替代品。然而,在水介质环境中其界面完整性失效,这会导致整体机械性能迅速丧失,这在文献中已有报道。在这项研究中,我们研究了用于磷酸钙玻璃纤维增强聚乳酸复合材料的偶联剂。使用了三种具有不同润湿性的偶联剂,通过改善聚合物基体与纤维之间的界面键合,提高初始机械性能并在体外保留其性能。偶联剂通过在优化浓度的偶联剂溶液中浸渍涂覆到玻璃纤维上进行接枝。三氨基丙基三乙氧基硅烷和山梨醇封端 PLA 低聚物处理提高了复合材料的初始弯曲性能(APS 处理时强度提高 27%,SPLA 处理时模量提高 17%),三氨基丙基三乙氧基硅烷和己二异氰酸酯(HDI)处理也降低了在降解过程中弯曲强度和模量的损失。与对照相比,HDI 处理的样品在 PBS 溶液中降解 28 天后分别保留了初始强度和模量的 57.2%和 64.7%,而对照中仅保留了初始强度的 34%和初始模量的 52%。初始弯曲性能的提高与由于偶联剂提供的玻璃纤维和聚合物基体之间的共价键合而导致的界面剪切结合强度的提高有关。降解过程中机械性能损失的延迟被认为是由于界面的疏水性所致,这可能阻碍了界面完整性的丧失,并因此导致复合材料的机械完整性丧失。使用原代人成骨细胞系对所有偶联剂处理和对照的复合材料进行了细胞相容性测试。观察到与对照相比,细胞粘附、增殖和分化具有可比性,支持在可植入装置中使用这些试剂。