Nippon Boehringer Ingelheim Co., Ltd., 6-7-5 Minatojima Minamimachi Chuo-ku Kobe Hyogo, 650-0047, Japan.
Int J Pharm. 2013 Nov 1;456(1):58-64. doi: 10.1016/j.ijpharm.2013.08.027. Epub 2013 Aug 27.
For moisture activated dry granulation (MADG), microcrystalline cellulose (MCC) or silicon dioxide is recommended for the moisture absorption stage. The aim of this study was to assess the suitability of alternative excipients as moisture absorbents with regard to the disintegration mechanism of resulting lactose based placebo formulations. Beside high and low moisture MCC grades, the additions of magnesium aluminometasilicate (MAMS), pregelatinized starch (S1500), crospovidone (Kollidon CL) and carmellose calcium (ECG 505) were evaluated. High shear granulation (HSG) was conducted as a reference process. The overall disintegration time of all tablets produced by MADG was significantly faster whereas hardness yield and mass-variability were equal or superior compared to the HSG process. Powder wettability of the different moisture absorbents was identified to be a key driver for rapid disintegration, whereas tablet porosity had only a minor influence on the target hardness of the tablets.
对于水分激活干法造粒(MADG),推荐使用微晶纤维素(MCC)或二氧化硅作为水分吸收阶段的吸湿剂。本研究的目的是评估替代辅料作为吸湿剂的适用性,以了解它们对基于乳糖的安慰剂制剂崩解机制的影响。除了高低湿度 MCC 级分外,还评估了硅酸镁铝(MAMS)、预胶化淀粉(S1500)、交联聚维酮(Kollidon CL)和交联羧甲基纤维素钠(ECG 505)的添加效果。高剪切制粒(HSG)被用作参考工艺。通过 MADG 生产的所有片剂的整体崩解时间明显更快,而硬度收率和质量变异性与 HSG 工艺相当或更高。不同吸湿剂的粉末润湿性被确定为快速崩解的关键驱动因素,而片剂孔隙率对片剂的目标硬度仅有较小影响。