Planta Piloto de Procesos Industriales y Microbiológicos (PROIMI), CONICET, Av. Belgrano y Pje. Caseros, 4000 Tucumán, Argentina; Universidad de San Pablo-Tucumán, Argentina.
J Hazard Mater. 2013 Oct 15;261:577-83. doi: 10.1016/j.jhazmat.2013.08.005. Epub 2013 Aug 12.
In recent years, increasing interest has been shown in the use of bioemulsifiers as washing agents that can enhance desorption of soil-bound metals. However, high production costs derived from the use of expensive substrates for formulation of the fermentation media represent the main challenge for full, large-scale implementation of bioemulsifiers. This work reports on a first study of bioemulsifier production by the actinobacterium Amycolatopsis tucumanensis DSM 45259 using different carbon and nitrogen sources. Preliminary results on the potential use of these compounds as washing agents for soils contaminated with Cu(II) and Cr(VI) are also presented. The best specific production was detected using glycerol and urea as carbon and nitrogen substrates, respectively. However, with all of the substrates used during the batch assay, the bioemulsifiers showed high levels of stability at extreme conditions of pH, temperature, and salt concentration. Under the current assay conditions, the bioemulsifiers were not effective in removing Cu(II) from soil. However, they were able to mediate Cr(VI) recovery, with the removal percentage doubled compared to that seen when using deionized water. These findings appear promising for the development of remediation technologies for hexavalent chromium compounds based upon direct use of these microbial emulsifiers.
近年来,人们对生物乳化剂作为洗涤助剂的应用越来越感兴趣,因为它们可以增强土壤结合态金属的解吸。然而,由于发酵培养基的配方需要使用昂贵的基质,导致生产成本高昂,这是生物乳化剂全面、大规模应用的主要挑战。本工作首次报道了使用 Actinobacteria Amycolatopsis tucumanensis DSM 45259 利用不同碳源和氮源生产生物乳化剂的情况。还介绍了这些化合物作为 Cu(II)和 Cr(VI)污染土壤洗涤助剂的潜在用途的初步结果。使用甘油和尿素分别作为碳源和氮源时,检测到了最佳的比生产能力。然而,在用所有在分批试验中使用的基质时,生物乳化剂在极端 pH 值、温度和盐浓度条件下表现出很高的稳定性。在当前的试验条件下,生物乳化剂不能有效地从土壤中去除 Cu(II)。然而,它们能够介导 Cr(VI)的回收,与使用去离子水相比,去除率提高了一倍。这些发现为基于直接使用这些微生物乳化剂的六价铬化合物修复技术的发展提供了希望。