Department of Electrical Engineering, National Cheng-Kung University, Tainan 701, Taiwan, ROC.
Department of Electrical Engineering, National Cheng-Kung University, Tainan 701, Taiwan, ROC.
ISA Trans. 2014 Jan;53(1):56-75. doi: 10.1016/j.isatra.2013.08.007. Epub 2013 Sep 5.
A modified nonlinear autoregressive moving average with exogenous inputs (NARMAX) model-based state-space self-tuner with fault tolerance is proposed in this paper for the unknown nonlinear stochastic hybrid system with a direct transmission matrix from input to output. Through the off-line observer/Kalman filter identification method, one has a good initial guess of modified NARMAX model to reduce the on-line system identification process time. Then, based on the modified NARMAX-based system identification, a corresponding adaptive digital control scheme is presented for the unknown continuous-time nonlinear system, with an input-output direct transmission term, which also has measurement and system noises and inaccessible system states. Besides, an effective state space self-turner with fault tolerance scheme is presented for the unknown multivariable stochastic system. A quantitative criterion is suggested by comparing the innovation process error estimated by the Kalman filter estimation algorithm, so that a weighting matrix resetting technique by adjusting and resetting the covariance matrices of parameter estimate obtained by the Kalman filter estimation algorithm is utilized to achieve the parameter estimation for faulty system recovery. Consequently, the proposed method can effectively cope with partially abrupt and/or gradual system faults and input failures by the fault detection.
本文提出了一种基于改进非线性自回归滑动平均外生输入(NARMAX)模型的状态空间自校正器,具有容错能力,用于具有直接输入到输出传递矩阵的未知非线性随机混合系统。通过离线观测器/卡尔曼滤波器识别方法,可以得到改进 NARMAX 模型的良好初始猜测,从而减少在线系统识别过程的时间。然后,基于改进的基于 NARMAX 的系统识别,针对具有测量和系统噪声以及不可访问系统状态的未知连续时间非线性系统,提出了相应的自适应数字控制方案。此外,针对未知多变量随机系统,提出了一种有效的容错状态空间自校正器方案。通过比较卡尔曼滤波估计算法估计的新息过程误差,提出了一种定量准则,从而利用调整和重置卡尔曼滤波估计算法获得的参数估计的协方差矩阵的加权矩阵重置技术来实现故障系统恢复的参数估计。因此,该方法可以通过故障检测有效地应对部分突发和/或渐进系统故障和输入故障。