Gaines Robert J, Rockwood Jason, Garland Joshua, Ellingson Christopher, Demaio Marlene
Orthopedics. 2013 Sep;36(9):e1155-8. doi: 10.3928/01477447-20130821-17.
The purpose of this study was to determine differences in insertional articular trauma in infrapatellar tibial portal and suprapatellar portal intramedullary tibial nail insertion techniques. A cadaveric study was performed on 10 matched pairs of fresh-frozen adult cadaver lower extremities with intact extensor mechanisms. Two study groups with 10 limbs each were created: left lower limbs were treated with a standard medial parapatellar nailing portal and right lower limbs were treated with a suprapatellar tibial nailing portal. Start points were created under fluoroscopic guidance in anteroposterior and mediolateral planes. A start wire was placed and opening reaming was performed on the specimens using instrumentation specific to the nailing portal. Specimens were then dissected by medial parapatellar arthrotomy, revealing the intra-articular condition of the knee structures. The border of the tibial entry reamer hole was measured to the anterior horns of the menisci, anterior cruciate ligament root, and intermeniscal ligament using a digital caliper accurate to 0.02 mm. The structure was considered damaged if the structure was obviously damaged on visual inspection or if a measurement was less than 1 mm. Impact to intra-articular structures was numerically lower in the suprapatellar group (2/10) compared with the infrapatellar group (4/10), but the difference was not statistically significant between the 2 groups (P=.629). The suprapatellar portal approach to the tibial start point demonstrated a lower overall incidence of damage to intra-articular structures, but no significant statistical difference existed between the 2 treatment groups.
本研究的目的是确定髌下胫骨入口和髌上入口胫骨髓内钉插入技术在插入性关节创伤方面的差异。对10对匹配的新鲜冷冻成年尸体下肢进行了尸体研究,其伸肌机制完好。创建了两个研究组,每组10条肢体:左下肢采用标准内侧髌旁入路进行髓内钉固定,右下肢采用髌上胫骨髓内钉入路。在荧光透视引导下在前后位和内外侧位平面创建起始点。放置起始导丝,并使用特定于入路的器械对标本进行开口扩髓。然后通过内侧髌旁关节切开术对标本进行解剖,以显示膝关节结构的关节内情况。使用精度为0.02毫米的数字卡尺测量胫骨入钉扩孔器孔边缘至半月板前角、前交叉韧带根部和半月板间韧带的距离。如果在肉眼检查中结构明显受损或测量值小于1毫米,则认为该结构受损。与髌下组(4/10)相比,髌上组对关节内结构的影响在数值上较低(2/10),但两组之间的差异无统计学意义(P = 0.629)。髌上入口至胫骨起始点的入路方式显示关节内结构损伤的总体发生率较低,但两个治疗组之间不存在显著的统计学差异。