Plant Biology Division, Samuel Roberts Noble Foundation, Ardmore, Oklahoma, United States of America.
PLoS One. 2013 Sep 5;8(9):e74805. doi: 10.1371/journal.pone.0074805. eCollection 2013.
Conidiogenesis is the primary process for asexual reproduction in filamentous fungi. As the conidia resulting from the conidiogenesis process are primarily disseminated via air currents and/or water, an outstanding question has been how fungi recognize aerial environments suitable for conidial development. In this study, we documented the somewhat complex development of the conidia-bearing structures, termed conidiophores, from several Aspergillus species in a subsurface (gel-phase) layer of solid media. A subset of the isolates studied was able to develop conidiophores in a gel-phase environment, but exposure to the aeriform environment was required for the terminal developmental transition from phialide cells to conidia. The remaining Aspergilli could not initiate the conidiogenesis process until they were exposed to the aeriform environment. Our observations of conidiophore development in high or low oxygen conditions in both aeriform and gel-phase environments revealed that oxygen and the aeriform state are positive environmental factors for inducing conidiogenesis in most of the aspergilli tested in this study. Transcriptional analysis using A. fumigatus strain AF293 confined to either the aeriform or gel-phase environments revealed that expression of a key regulatory gene for conidiophore development (AfubrlA) is facilitated by oxygen while expression of another regulatory gene controlling conidia formation from phialides (AfuabaA) was repressed regardless of oxygen levels in the gel-embedded environment. Furthermore, by comparing the developmental behavior of conidiation-defective mutants lacking genes controlling various regulatory checkpoints throughout the conidiogenesis pathway, we propose that this aerial response by the fungus requires both oxygen and the phase transition (solid to aeriform), with these environmental signals integrating into the upstream regulatory pathway and central regulatory pathway of conidiogenesis, respectively. Our findings provide not only novel insight into how fungi respond to an aerial environment to trigger development for airborne conidia production but also the relationship between environmental factors and conidiogenesis regulation in aspergilli.
分生孢子发生是丝状真菌无性繁殖的主要过程。由于由分生孢子发生过程产生的分生孢子主要通过气流和/或水传播,因此一个悬而未决的问题是真菌如何识别适合分生孢子发育的空气环境。在这项研究中,我们记录了几个曲霉属物种的分生孢子结构(称为分生孢子梗)在固体培养基的亚表面(凝胶相)层中的发育情况。在所研究的分离物中,有一部分能够在凝胶相中发育分生孢子梗,但需要暴露于气态环境才能完成从产孢细胞到分生孢子的末端发育转变。其余的曲霉属真菌在暴露于气态环境之前无法启动分生孢子发生过程。我们观察到在气态和凝胶相环境中的高氧或低氧条件下分生孢子梗的发育情况,结果表明,氧气和气态状态是诱导本研究中测试的大多数曲霉属真菌进行分生孢子发生的积极环境因素。使用 A. fumigatus 菌株 AF293 在气态或凝胶相环境中进行转录分析,结果表明,分生孢子梗发育的关键调节基因(AfubrlA)的表达受到氧气的促进,而控制从产孢细胞形成分生孢子的另一个调节基因(AfuabaA)的表达则受到抑制,无论凝胶环境中的氧气水平如何。此外,通过比较缺乏控制分生孢子发生途径中各种调节检查点的基因的分生孢子缺陷突变体的发育行为,我们提出真菌对空气环境的这种反应需要氧气和相转变(固态到气态),这些环境信号分别整合到分生孢子发生的上游调节途径和中央调节途径中。我们的发现不仅提供了关于真菌如何响应空气环境以触发空气传播分生孢子产生的新见解,还提供了环境因素与曲霉属分生孢子发生调节之间的关系。