Munyon Charles N, Koubeissi Mohamad Z, Syed Tanvir U, Lüders Hans O, Miller Jonathan P
Department of Neurological Surgery, University Hospitals Case Medical Center, Cleveland, Ohio, USA.
Stereotact Funct Neurosurg. 2013;91(6):399-403. doi: 10.1159/000351524. Epub 2013 Oct 9.
Frame-based stereotaxy and open craniotomy may seem mutually exclusive, but invasive electrophysiological monitoring can require broad sampling of the cortex and precise targeting of deeper structures.
The purpose of this study is to describe simultaneous frame-based insertion of depth electrodes and craniotomy for placement of subdural grids through a single surgical field and to determine the accuracy of depth electrodes placed using this technique.
A total of 6 patients with intractable epilepsy underwent placement of a stereotactic frame with the center of the planned cranial flap equidistant from the fixation posts. After volumetric imaging, craniotomy for placement of subdural grids was performed. Depth electrodes were placed using frame-based stereotaxy. Postoperative CT determined the accuracy of electrode placement.
A total of 31 depth electrodes were placed. Mean distance of distal electrode contact from the target was 1.0 ± 0.15 mm. Error was correlated to distance to target, with an additional 0.35 mm error for each centimeter (r = 0.635, p < 0.001); when corrected, there was no difference in accuracy based on target structure or method of placement (prior to craniotomy vs. through grid, p = 0.23).
The described technique for craniotomy through a stereotactic frame allows placement of subdural grids and depth electrodes without sacrificing the accuracy of a frame or requiring staged procedures.
基于框架的立体定向术和开颅手术看似相互排斥,但侵入性电生理监测可能需要对皮质进行广泛采样并精确靶向更深层结构。
本研究的目的是描述通过单一手术视野同时基于框架插入深度电极和开颅以放置硬膜下网格,并确定使用该技术放置深度电极的准确性。
共有6例难治性癫痫患者接受了立体定向框架的放置,计划颅骨瓣的中心与固定柱等距。进行容积成像后,进行开颅以放置硬膜下网格。使用基于框架的立体定向术放置深度电极。术后CT确定电极放置的准确性。
共放置了31个深度电极。远端电极触点与目标的平均距离为1.0±0.15毫米。误差与到目标的距离相关,每厘米额外误差0.35毫米(r = 0.635,p <0.001);校正后,基于目标结构或放置方法(开颅术前与通过网格放置)的准确性没有差异(p = 0.23)。
所描述的通过立体定向框架进行开颅的技术允许放置硬膜下网格和深度电极,而不会牺牲框架的准确性或需要分阶段进行手术。