Department of Dentistry, First People's Hospital of Wujiang District, Medical School of Nantong University, Suzhou, China.
Arch Oral Biol. 2013 Nov;58(11):1609-17. doi: 10.1016/j.archoralbio.2013.07.014. Epub 2013 Aug 8.
To investigate the relation between the radicular groove (RG) and the internal root canal morphology in mandibular first premolars by using micro-computed tomography.
A total of 249 extracted mandibular first premolars were collected from a native Chinese population. After scoring the RGs according to the Arizona State University dental anthropology scoring system (ASUDAS), 148 teeth were selected and scanned by using micro-computed tomography. The root canal systems were examined two- and three-dimensionally under the software Mimics 10.01. The depth and angle of the RGs at different levels were measured.
The presence of Tomes' root trait (ASU=3-5) was identified in 47/249 of the sample teeth (18.9%). The mean depths of the shallow (ASU=1), moderately deep (ASU=2) and deep grooves (ASU=3) were 0.18, 0.36 and 1.24 mm, and the mean angles were 28.8°, 47.5° and 101.7°, respectively. The incidences of complicated root canal systems were 15.5% (ASU=0), 18.7% (ASU=1), 37.0% (ASU=2) and 90.0% (ASU=3). In nine scanned specimens, accessory canals were found communicating between the main canal and the RG. Invagination canals were observed in four specimens, and C-shaped canals were found in 29 specimens (19.6%).
The complexity of root canal systems in mandibular first premolars is determined by the severity of RGs, which can be scored by the ASUDAS. Detecting the incidence of various root canal forms corresponding to each ASUDAS score is useful for calculating the standardized rates from published data of dental anthropology. Understanding the anatomic features of the RG and the internal root canal system is essential for successful dental treatment.
利用微计算机断层扫描研究下颌第一前磨牙根管颊舌向向根分歧区(RG)与根管内部形态的关系。
从中国人群中收集了 249 颗下颌第一前磨牙。根据亚利桑那州立大学牙人类学评分系统(ASUDAS)对 RG 进行评分后,选择了 148 颗牙齿并用微计算机断层扫描进行扫描。在 Mimics 10.01 软件下对根管系统进行二维和三维检查。测量不同水平 RG 的深度和角度。
47/249(18.9%)的样本牙齿存在 Tomes'根特征(ASU=3-5)。浅沟(ASU=1)、中深沟(ASU=2)和深沟(ASU=3)的平均深度分别为 0.18、0.36 和 1.24mm,平均角度分别为 28.8°、47.5°和 101.7°。复杂根管系统的发生率分别为 15.5%(ASU=0)、18.7%(ASU=1)、37.0%(ASU=2)和 90.0%(ASU=3)。在 9 个扫描标本中,发现了副根管与主根管和 RG 之间相通。在 4 个标本中观察到了内陷沟,在 29 个标本中发现了 C 形根管(19.6%)。
下颌第一前磨牙根管系统的复杂性由 RG 的严重程度决定,可由 ASUDAS 评分确定。检测与每个 ASUDAS 评分相对应的各种根管形态的发生率有助于从牙人类学的已发表数据中计算标准化率。了解 RG 和根管内部形态的解剖特征对于成功的牙科治疗至关重要。