Watanabe Takashi, Murakami Takuya, Handa Yasunobu
IEEE Int Conf Rehabil Robot. 2013 Jun;2013:6650484. doi: 10.1109/ICORR.2013.6650484.
The cycling wheelchair "Profhand" developed by our research group in Japan has been found to be useful in rehabilitation of motor function of lower limbs. It is also expected for rehabilitation of paraplegic subjects to propel the cycling wheelchair by lower limbs controlled by functional electrical stimulation (FES). In this paper, a prototype FES control system for the cycling wheelchair was developed using wireless surface stimulators and wireless inertial sensors and tested with healthy subjects. The stimulation pattern that stimulated the quadriceps femoris and the gluteus maximus at the same time was shown to be effective to propel the Profhand. From the analysis of steady state cycling, it was shown that the cycling speed was smaller and the variation of the speed was larger in FES cycling than those of voluntary cycling. Measured angular velocity of the crank suggested that stimulation timing have to be changed considering delay in muscle response to electrical stimulation and cycling speed in order to improve FES cycling. It was also suggested that angle of the pedal have to be adjusted by controlling ankle joint angle with FES in order to apply force appropriately.
我们日本研究团队研发的“Profhand”循环轮椅已被证明对下肢运动功能康复有用。对于截瘫患者,通过功能性电刺激(FES)控制下肢驱动循环轮椅进行康复也备受期待。本文利用无线表面刺激器和无线惯性传感器开发了一种用于循环轮椅的FES控制系统原型,并在健康受试者身上进行了测试。结果表明,同时刺激股四头肌和臀大肌的刺激模式对驱动“Profhand”轮椅有效。通过对稳态骑行的分析发现,与自主骑行相比,FES骑行的速度更小且速度变化更大。测量得到的曲柄角速度表明,为了改善FES骑行,必须考虑肌肉对电刺激的反应延迟和骑行速度来改变刺激时机。还表明,为了适当地施加力,必须通过FES控制踝关节角度来调整踏板角度。