Amutha Ramakrishnan, Lee Gang-Juan, Wu Jerry J, Sathish Marappan, Sillanpää Mika E T
Laboratory of Green Chemistry, Faculty of Technology, Lappeenranta University of Technology, Sammonkatu 12, 50130 Mikkeli, Finland.
J Nanosci Nanotechnol. 2013 Oct;13(10):6635-43. doi: 10.1166/jnn.2013.7739.
Biporous microsphere, flower and concaved cuboctahedrans like alpha-Fe2O3 superstructures have been synthesized by using a new synthetic method. Hydrothermal reaction of ferric chloride with potassium thiocyanate at 200 degrees C yields self-assembled microsphere, flower, and concaved cuboctahedrans like intermediates in ethanol, water:ethanol (1:1) mixed solvent and in water, respectively. These intermediates were further converted into corresponding alpha-Fe2O3 in a thermal decomposition process at 600 degrees C under oxygen atmospheric conditions. The influence of solvent, hydrothermal temperature, and concentration of iron precursors on the intermediate morphology was studied, and the growth mechanism has also been proposed. The synthesized intermediates and alpha-Fe2O3 were characterized using X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM) and nitrogen adsorption analysis. The FE-SEM results indicated formation of biporous flowerlike morphology. The electrochemical properties of the flowerlike alpha-Fe2O3 electrodes in a Li-ion battery have been investigated. Plausible formation mechanisms of these intermediates were proposed.
通过一种新的合成方法合成了具有双孔微球、花朵状和凹面立方八面体状的α-Fe₂O₃超结构。氯化铁与硫氰酸钾在200℃下进行水热反应,分别在乙醇、水与乙醇(1:1)的混合溶剂以及水中生成自组装的微球、花朵状和凹面立方八面体状中间体。在氧气气氛条件下,于600℃的热分解过程中,这些中间体进一步转化为相应的α-Fe₂O₃。研究了溶剂、水热温度和铁前驱体浓度对中间体形态的影响,并提出了生长机理。使用X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)高分辨率透射电子显微镜(HR-TEM)和氮吸附分析对合成的中间体和α-Fe₂O₃进行了表征。FE-SEM结果表明形成了双孔花朵状形态。研究了花朵状α-Fe₂O₃电极在锂离子电池中的电化学性能。提出了这些中间体可能的形成机理。