Bektas Cem Inan, Kankaya Yuksel, Ozer Kadri, Baris Ruser, Aslan Ozlem Colak, Kocer Ugur
Plastic, Reconstructive and Aesthetic Surgery Clinic, Ankara Training and Research Hospital, Ankara, Turkey.
Arch Plast Surg. 2013 Nov;40(6):711-4. doi: 10.5999/aps.2013.40.6.711. Epub 2013 Nov 8.
The most common cause of skin graft failure is the collection of blood or serous fluid underneath the graft. In our study, we describe the use of silicone tube for tie-over dressing to secure the skin graft margins with the aim of decreasing loss of the skin graft, particularly in grafting of deep wounds.
Between March 2008 and July 2011, we used this technique in 17 patients with skin defects with depths ranging from 3.5 to 8 mm (mean, 5.5 mm). First, the skin graft was sutured with 3/0 silk suture material from its corners. Then, a silicone round drain tube was sutured with 3/0 absorbable polyglactin 910 over the margins of the graft. Finally, long silk threads were tied over the bolus dressing, and the tie-over dressing was completed in the usual fashion.
The mean follow-up was 7 months (range, 2-10 months) in the outpatient clinic. Graft loss on the graft margins due to hematoma or seroma was not developed. The results of adhesion between the graft and wound bed peripherally was excellent.
In our study, we suggest that use of a silicone tube for additional pressure on the edges of skin grafts in case of reconstruction of deep skin defects.
皮肤移植失败最常见的原因是移植皮片下血液或浆液的积聚。在我们的研究中,我们描述了使用硅胶管进行包扎加压,以固定皮肤移植边缘,目的是减少皮肤移植的损失,特别是在深部伤口的移植中。
在2008年3月至2011年7月期间,我们对17例皮肤缺损深度为3.5至8毫米(平均5.5毫米)的患者使用了该技术。首先,用3/0丝线从皮片的角部缝合皮片。然后,用3/0可吸收聚乙醇酸910缝线将硅胶圆形引流管缝合在移植边缘上。最后,用长丝线在敷料团块上打结,以常规方式完成包扎加压。
门诊患者的平均随访时间为7个月(范围为2至10个月)。未出现因血肿或血清肿导致的移植边缘移植皮片丢失。移植皮片与伤口床周边的粘连结果良好。
在我们的研究中,我们建议在深部皮肤缺损重建时,使用硅胶管对皮肤移植边缘施加额外压力。