Key Laboratory of Natural Resource of the Changbai Mountain and Functional Molecular (Yanbian University), Ministry of Education, Park Road 977, Yanji City, Jilin Province 133002, China.
Anal Chim Acta. 2013 Dec 17;805:45-53. doi: 10.1016/j.aca.2013.10.043. Epub 2013 Nov 1.
Gas purge-microsyringe extraction (GP-MSE) is a rapid and exhaustive microextraction technique for volatile and semivolatile compounds. In this study, a theoretical system of GP-MSE was established by directly extracting and analyzing 16 kinds of polycyclic aromatic hydrocarbons (PAHs) from plant samples. On the basis of theoretical consideration, a full factorial experimental design was first used to evaluate the main effects and interactions of the experimental parameters affecting the extraction efficiency. Further experiments were carried out to determine the extraction kinetics and desorption temperature-dependent. The results indicated that three factors, namely desorption temperature (temperature of sample phase) Td, extraction time t, and gas flow rate u, had a significantly positive effect on the extraction efficiency of GP-MSE for PAHs. Extraction processes of PAHs in plant samples followed by first-order kinetics (relative coefficient R(2) of simulation curves were 0.731-1.000, with an average of 0.958 and 4.06% relative standard deviation), and obviously depended on the desorption temperature. Furthermore, the effect of the matrix was determined from the difference in Eapp,d. Finally, satisfactory recoveries of 16 PAHs were obtained using optimal parameters. The study demonstrated that GP-MSE could provide a rapid and exhaustive means of direct extraction of PAHs from plant samples. The extraction kinetics were similar that of the inverse process of the desorption kinetics of the sample phase.
气体吹扫-微注射器萃取(GP-MSE)是一种快速、彻底的挥发性和半挥发性化合物微萃取技术。在本研究中,通过直接从植物样品中提取和分析 16 种多环芳烃(PAHs),建立了 GP-MSE 的理论体系。在理论考虑的基础上,首先采用完全析因实验设计来评估影响萃取效率的实验参数的主要效应和相互作用。进一步的实验用于确定萃取动力学和温度依赖性解吸。结果表明,三个因素,即解吸温度(样品相的温度)Td、萃取时间 t 和气体流速 u,对 GP-MSE 萃取 PAHs 的效率有显著的正影响。植物样品中 PAHs 的萃取过程遵循一级动力学(模拟曲线的相对系数 R²为 0.731-1.000,平均为 0.958,相对标准偏差为 4.06%),明显依赖于解吸温度。此外,通过 Eapp,d 的差异来确定基质的影响。最后,使用最佳参数获得了 16 种 PAHs 的令人满意的回收率。研究表明,GP-MSE 可以为植物样品中 PAHs 的直接萃取提供一种快速、彻底的方法。萃取动力学与样品相解吸动力学的逆过程相似。