[Study on hydrogen autotrophic denitrification of bio-ceramic reactor].

Nitrate wastewater is processed in a bio-ceramic reactor based on hydrogen autotrophic denitrification. The implementation procedure of biological denitrification by hydrogen autotrophic denitrification was investigated. The effects of hydraulic retention time, influent nitrate load, influent pH, temperature and the amount of hydrogen were assessed throughout this trial. The results showed that the removal rate of NO-(3) -N was 94. 54% and 97. 47% when the hydraulic retention time was 24 h and 48 h, respectively. When the hydraulic retention time was in the range of 5-16 h, the removal rate gradually dropped with the shortening of the hydraulic retention time. When the influent NO-(3) -N concentration was low, with the increase in the influent NO-(3) -N concentration, the degradation rate also increased. The denitrification was inhibited when the NO-(3) -N concentration was higher than 110 mg.L-1. Neutral and alkaline environment was more suitable for the reactor. The reactor showed a wide range of temperature adaptation and the optimum temperature of the reactor was from 25 to 30 degrees C. When hydrogen was in short supply, the effect of denitrification was significantly reduced. These results indicated the specificity of hydrogen utilization by the denitrifying bacteria. The effluent nitrite nitrogen concentration was maintained at low levels during the operation.