Kawada Y, Yunoki A, Yamada T, Hino Y
National Metrology Institute of Japan, National Institute of Advanced Sciences and Technology, Tsukuba Central 2, 1-1-1 Umezono, Tsukuba 305-8568, Japan.
National Metrology Institute of Japan, National Institute of Advanced Sciences and Technology, Tsukuba Central 2, 1-1-1 Umezono, Tsukuba 305-8568, Japan.
Appl Radiat Isot. 2014 May;87:183-7. doi: 10.1016/j.apradiso.2013.11.106. Epub 2013 Dec 1.
In order to clarify the γ-efficiency dependency of 4πβ-γ efficiency functions, a series of 4πβ-γ efficiency extrapolation measurements of a (134)Cs source were carried out for a wide variety of γ-geometries using a 4πβ(PS)-4πγ detector configuration. As the source is situated in the plastic scintillator (PS) β-detector, the γ-efficiency of the system can be readily changed by extracting the β-detector from the well-hole in a series of stages. For data acquisition and analyses, a list-mode two-parameter data acquisition system was employed. The forms of the extrapolation curves were monitored with decreasing γ-geometry, eventually exhibiting a similar behavior to those obtained in a usual 4πβ-γ coincidence counting system. The experimental results and considerations suggested that the γ-geometry dependency of the efficiency functions were due to summing effects in the γ-channel, and some qualitative remarks on the form of the extrapolation functions are given.
为了阐明4πβ - γ效率函数的γ效率依赖性,使用4πβ(PS)-4πγ探测器配置,针对各种γ几何形状对(134)Cs源进行了一系列4πβ - γ效率外推测量。由于源位于塑料闪烁体(PS)β探测器中,通过分阶段从井孔中取出β探测器,可以很容易地改变系统的γ效率。为了进行数据采集和分析,采用了列表模式双参数数据采集系统。随着γ几何形状的减小,监测外推曲线的形式,最终呈现出与在常规4πβ - γ符合计数系统中获得的曲线相似的行为。实验结果和相关思考表明,效率函数的γ几何形状依赖性是由于γ通道中的求和效应引起的,并给出了关于外推函数形式的一些定性说明。