Hatami-Marbini Hamed
School of Mechanical and Aerospace Engineering, Oklahoma State University, 218 Engineering North, Stillwater, OK, 74078-5016, USA,
Ann Biomed Eng. 2014 Aug;42(8):1740-8. doi: 10.1007/s10439-014-0996-6. Epub 2014 Mar 26.
The cornea is a protective transparent connective tissue covering the front of the eye. The standard uniaxial tensile experiments are among the most popular techniques for investigating biomechanical properties of the cornea. This experimental method characterizes the stress-strain response of corneal strips immersed in a bathing solution. In the present study, the important roles of corneal hydration on tensile viscoelastic properties were investigated. The thickness was used as a surrogate for hydration and uniaxial tensile experiments were performed on bovine corneal samples with four different average thickness (hydration), i.e., 1100 μm (4.87 mg water/mg dry tissue), 900 μm (4.13 mg water/mg dry tissue), 700 μm (3.20 mg water/mg dry tissue), and 500 μm (1.95 mg water/mg dry tissue). The samples were immersed in mineral oil in order to prevent their swelling during the experiments. A quasilinear viscoelastic (QLV) model was used to analyze the experimental measurements and determine viscoelastic material constants. It was observed that both maximum and equilibrium (relaxed) stresses were exponentially increased with decreasing tissue thickness (hydration). Furthermore, the QLV model successfully captured the corneal viscoelastic response with an average R (2) value greater than 0.99. Additional experiments were conducted in OBSS in order to confirm that these significant changes in viscoelastic properties were because of corneal hydration and not the bathing solution. The findings of this study suggest that extra care must be taken in interpreting the results of earlier uniaxial tensile testings and their correspondence to the corneal biomechanical properties.
角膜是覆盖在眼睛前部的一层保护性透明结缔组织。标准单轴拉伸实验是研究角膜生物力学特性最常用的技术之一。这种实验方法用于表征浸泡在浴液中的角膜条带的应力-应变响应。在本研究中,研究了角膜水化对拉伸粘弹性特性的重要作用。厚度被用作水化程度的替代指标,并对具有四种不同平均厚度(水化程度)的牛角膜样本进行了单轴拉伸实验,即1100μm(4.87mg水/mg干组织)、900μm(4.13mg水/mg干组织)、700μm(3.20mg水/mg干组织)和500μm(1.95mg水/mg干组织)。为防止样本在实验过程中肿胀,将其浸泡在矿物油中。使用准线性粘弹性(QLV)模型分析实验测量结果并确定粘弹性材料常数。结果发现,最大应力和平衡(松弛)应力均随组织厚度(水化程度)的减小呈指数增加。此外,QLV模型成功捕捉到了角膜的粘弹性响应,平均R²值大于0.99。为了证实粘弹性特性的这些显著变化是由于角膜水化而非浴液引起的,还在OBSS中进行了额外实验。本研究结果表明,在解释早期单轴拉伸测试结果及其与角膜生物力学特性的对应关系时必须格外小心。