Loschak Paul M, Brattain Laura J, Howe Robert D
Harvard School of Engineering and Applied Sciences, Cambridge, MA, 02138 USA.
Harvard School of Engineering and Applied Sciences, Cambridge, MA, 02138 USA; MIT Lincoln Laboratory (
IEEE Int Conf Robot Autom. 2013 Dec 31;2013:5794-5799. doi: 10.1109/ICRA.2013.6631410.
Intracardiac echocardiography (ICE) catheters enable high-quality ultrasound imaging within the heart, but their use in guiding procedures is limited due to the difficulty of manually pointing them at structures of interest. This paper presents the design and testing of a catheter steering model for robotic control of commercial ICE catheters. The four actuated degrees of freedom (4-DOF) are two catheter handle knobs to produce bi-directional bending in combination with rotation and translation of the handle. An extra degree of freedom in the system allows the imaging plane (dependent on orientation) to be directed at an object of interest. A closed form solution for forward and inverse kinematics enables control of the catheter tip position and the imaging plane orientation. The proposed algorithms were validated with a robotic test bed using electromagnetic sensor tracking of the catheter tip. The ability to automatically acquire imaging targets in the heart may improve the efficiency and effectiveness of intracardiac catheter interventions by allowing visualization of soft tissue structures that are not visible using standard fluoroscopic guidance. Although the system has been developed and tested for manipulating ICE catheters, the methods described here are applicable to any long thin tendon-driven tool (with single or bi-directional bending) requiring accurate tip position and orientation control.
心内超声心动图(ICE)导管能够在心脏内部实现高质量的超声成像,但由于手动将其指向感兴趣的结构存在困难,其在引导手术中的应用受到限制。本文介绍了一种用于对商用ICE导管进行机器人控制的导管转向模型的设计与测试。四个驱动自由度(4-DOF)是两个导管手柄旋钮,用于结合手柄的旋转和平移产生双向弯曲。系统中的一个额外自由度允许成像平面(取决于方向)指向感兴趣的物体。正向和逆向运动学的封闭形式解能够控制导管尖端位置和成像平面方向。所提出的算法通过使用电磁传感器跟踪导管尖端的机器人试验台进行了验证。通过允许可视化使用标准荧光透视引导无法看到的软组织结构,自动获取心脏内成像目标的能力可能会提高心内导管介入手术的效率和效果。尽管该系统已针对操作ICE导管进行了开发和测试,但这里描述的方法适用于任何需要精确尖端位置和方向控制的长而细的腱驱动工具(具有单向或双向弯曲)。