Suppr超能文献

混合蛋白吸附层的剪切流变学与其结构的表面力测量研究。

Shear rheology of mixed protein adsorption layers vs their structure studied by surface force measurements.

机构信息

Department of Chemical Engineering, Faculty of Chemistry and Pharmacy, Sofia University, 1164 Sofia, Bulgaria.

Department of Chemical Engineering, Faculty of Chemistry and Pharmacy, Sofia University, 1164 Sofia, Bulgaria.

出版信息

Adv Colloid Interface Sci. 2015 Aug;222:148-61. doi: 10.1016/j.cis.2014.04.009. Epub 2014 May 2.

Abstract

The hydrophobins are proteins that form the most rigid adsorption layers at liquid interfaces in comparison with all other investigated proteins. The mixing of hydrophobin HFBII with other conventional proteins is expected to reduce the surface shear elasticity and viscosity, E(sh) and η(sh), proportional to the fraction of the conventional protein. However, the experiments show that the effect of mixing can be rather different depending on the nature of the additive. If the additive is a globular protein, like β-lactoglobulin and ovalbumin, the surface rigidity is preserved, and even enhanced. The experiments with separate foam films indicate that this is due to the formation of a bilayer structure at the air/water interface. The more hydrophobic HFBII forms the upper layer adjacent to the air phase, whereas the conventional globular protein forms the lower layer that faces the water phase. Thus, the elastic network formed by the adsorbed hydrophobin remains intact, and even reinforced by the adjacent layer of globular protein. In contrast, the addition of the disordered protein β-casein leads to softening of the HFBII adsorption layer. Similar (an even stronger) effect is produced by the nonionic surfactant Tween 20. This can be explained with the penetration of the hydrophobic tails of β-casein and Tween 20 between the HFBII molecules at the interface, which breaks the integrity of the hydrophobin interfacial elastic network. The analyzed experimental data for the surface shear rheology of various protein adsorption layers comply with a viscoelastic thixotropic model, which allows one to determine E(sh) and η(sh) from the measured storage and loss moduli, G' and G″. The results could contribute for quantitative characterization and deeper understanding of the factors that control the surface rigidity of protein adsorption layers with potential application for the creation of stable foams and emulsions with fine bubbles or droplets.

摘要

水蛋白是在液体界面形成最刚性吸附层的蛋白质,与所有其他研究过的蛋白质相比都是如此。预计将水蛋白 HFBII 与其他常规蛋白质混合会降低表面剪切弹性和粘性,E(sh) 和 η(sh) 与常规蛋白质的分数成正比。然而,实验表明,混合的效果可能因添加剂的性质而异。如果添加剂是球状蛋白,如β-乳球蛋白和卵清蛋白,则表面刚性得以保留,甚至增强。单独的泡沫膜实验表明,这是由于在气/水界面形成双层结构所致。疏水性更强的 HFBII 形成与气相相邻的上层,而常规的球状蛋白形成与水相相对的下层。因此,由吸附水蛋白形成的弹性网络保持完整,甚至通过相邻的球状蛋白层得到增强。相比之下,添加无序蛋白 β-酪蛋白会使 HFBII 吸附层软化。非离子表面活性剂 Tween 20 产生类似(甚至更强)的效果。这可以用β-酪蛋白和 Tween 20 的疏水尾部在界面处穿透 HFBII 分子来解释,这破坏了水蛋白界面弹性网络的完整性。对各种蛋白质吸附层的表面剪切流变学的分析实验数据符合粘弹性触变模型,该模型允许从测量的存储和损耗模量 G'和 G"来确定 E(sh)和 η(sh)。研究结果可能有助于对控制蛋白质吸附层表面刚性的因素进行定量表征和更深入的理解,从而有可能用于创建具有精细气泡或液滴的稳定泡沫和乳液。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验