Manzano Sara, Poveda-Reyes Sara, Ferrer Gloria Gallego, Ochoa Ignacio, Hamdy Doweidar Mohamed
Group of Structural Mechanics and Materials Modelling (GEMM), Aragón Institute of Engineering Research (I3A), University of Zaragoza, Spain; Mechanical Engineering Department, School of Engineering and Architecture (EINA), University of Zaragoza, Spain; Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), Spain.
Center for Biomaterials and Tissue Engineering, Universitat Politècnica de València, Valencia, Spain.
Comput Methods Programs Biomed. 2014 Oct;116(3):249-59. doi: 10.1016/j.cmpb.2014.06.001. Epub 2014 Jun 16.
Interpenetrated polymer networks (IPNs), composed by two independent polymeric networks that spatially interpenetrate, are considered as valuable systems to control permeability and mechanical properties of hydrogels for biomedical applications. Specifically, poly(ethyl acrylate) (PEA)-poly(2-hydroxyethyl acrylate) (PHEA) IPNs have been explored as good hydrogels for mimicking articular cartilage. These lattices are proposed as matrix implants in cartilage damaged areas to avoid the discontinuity in flow uptake preventing its deterioration. The permeability of these implants is a key parameter that influences their success, by affecting oxygen and nutrient transport and removing cellular waste products to healthy cartilage. Experimental try-and-error approaches are mostly used to optimize the composition of such structures. However, computational simulation may offer a more exhaustive tool to test and screen out biomaterials mimicking cartilage, avoiding expensive and time-consuming experimental tests. An accurate and efficient prediction of material's permeability and internal directionality and magnitude of the fluid flow could be highly useful when optimizing biomaterials design processes. Here we present a 3D computational model based on Sussman-Bathe hyperelastic material behaviour. A fluid structure analysis is performed with ADINA software, considering these materials as two phases composites where the solid part is saturated by the fluid. The model is able to simulate the behaviour of three non-biodegradable hydrogel compositions, where percentages of PEA and PHEA are varied. Specifically, the aim of this study is (i) to verify the validity of the Sussman-Bathe material model to simulate the response of the PEA-PHEA biomaterials; (ii) to predict the fluid flux and the permeability of the proposed IPN hydrogels and (iii) to study the material domains where the passage of nutrients and cellular waste products is reduced leading to an inadequate flux distribution in healthy cartilage tissue. The obtained results show how the model predicts the permeability of the PEA-PHEA hydrogels and simulates the internal behaviour of the samples and shows the distribution and quantification of fluid flux.
互穿聚合物网络(IPN)由两个在空间上相互贯穿的独立聚合物网络组成,被认为是控制用于生物医学应用的水凝胶的渗透性和机械性能的有价值的体系。具体而言,聚(丙烯酸乙酯)(PEA)-聚(丙烯酸2-羟乙酯)(PHEA)互穿聚合物网络已被探索作为模拟关节软骨的良好水凝胶。这些网格被提议作为软骨受损区域的基质植入物,以避免流体吸收的不连续性,防止其恶化。这些植入物的渗透性是影响其成功的关键参数,因为它会影响氧气和营养物质的运输,并将细胞废物清除到健康的软骨中。实验性的反复试验方法大多用于优化此类结构的组成。然而,计算模拟可能提供一种更详尽的工具来测试和筛选模拟软骨的生物材料,避免昂贵且耗时的实验测试。在优化生物材料设计过程时,准确而有效地预测材料的渗透性以及流体流动的内部方向性和大小可能非常有用。在此,我们提出一种基于苏斯曼-巴特超弹性材料行为的三维计算模型。使用ADINA软件进行流固耦合分析,将这些材料视为两相复合材料,其中固体部分被流体饱和。该模型能够模拟三种不可生物降解水凝胶组合物的行为,其中PEA和PHEA的百分比有所不同。具体而言,本研究的目的是:(i)验证苏斯曼-巴特材料模型模拟PEA-PHEA生物材料响应的有效性;(ii)预测所提出的IPN水凝胶的流体通量和渗透性;(iii)研究营养物质和细胞废物通过减少导致健康软骨组织中通量分布不足的材料区域。所得结果表明该模型如何预测PEA-PHEA水凝胶的渗透性并模拟样品的内部行为,并显示流体通量的分布和量化。