Suppr超能文献

下颌后牙解剖学极限在磨牙远移中的应用。

Mandibular posterior anatomic limit for molar distalization.

机构信息

Lecturer, Department of Orthodontics, School of Dentistry, Yonsei University, Seoul, Korea.

Professor, Department of Orthodontics, School of Dentistry, Yonsei University, Seoul, Korea.

出版信息

Am J Orthod Dentofacial Orthop. 2014 Aug;146(2):190-7. doi: 10.1016/j.ajodo.2014.04.021.

Abstract

INTRODUCTION

The purpose of this study was to investigate the mandibular posterior anatomic limit for molar distalization.

METHODS

Three-dimensional computed tomography scans were obtained on 34 adults with a skeletal Class I normodivergent facial profile and a normal occlusion. Posterior available space was measured at the crown and root levels along the posterior occlusal line connecting the buccal cusps of the first and second molars on the axial slices. It was also measured at the occlusal level on the lateral cephalograms derived from the computed tomography scans. The measurements on the cephalograms were used to predict the actual posterior available space determined by computed tomography and to determine the presence of root contact with the inner lingual cortex by linear regression and discriminant analyses, respectively.

RESULTS

The posterior available space was significantly smaller at the root level than at the crown level. Root contact was observed in 35.3% of the 68 roots. The posterior available space measured on the lateral cephalograms resulted in a regression equation with a coefficient of determination of 0.261 to predict actual available space and correctly identified root contact in 66.2% of cases with a threshold value of 3.9 mm.

CONCLUSIONS

The posterior anatomic limit appeared to be the lingual cortex of the mandibular body. Computed tomography scans are recommended for patients who require significant mandibular molar distalization.

摘要

简介

本研究旨在探讨下颌磨牙远移的后牙解剖学极限。

方法

对 34 名具有骨骼 I 类正常分散面型和正常咬合的成年人进行了三维 CT 扫描。在后牙咬合线上,从第一磨牙颊尖到第二磨牙颊尖,沿颊侧牙尖连接,在轴位片上测量牙冠和牙根水平的后牙可用空间。还在 CT 扫描得出的侧位头颅片上的咬合水平测量后牙可用空间。使用头颅侧位片上的测量值来预测 CT 确定的实际后牙可用空间,并通过线性回归和判别分析分别确定根与内舌侧皮质接触的情况。

结果

牙根水平的后牙可用空间明显小于牙冠水平。68 个牙根中有 35.3%观察到根接触。在侧位头颅片上测量的后牙可用空间得出一个回归方程,决定系数为 0.261,可预测实际可用空间,以 3.9mm 为阈值,正确识别 66.2%的根接触情况。

结论

后牙解剖学极限似乎是下颌体的舌侧皮质。建议对需要进行下颌磨牙远移的患者进行 CT 扫描。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验