Irmak Gülseren, Demirtaş T Tolga, Çetin Altındal Damla, Çalış Mert, Gümüşderelioğlu Menemşe
Department of Bioengineering, Hacettepe University, Ankara, Turkey.
Cells Tissues Organs. 2014;199(1):37-50. doi: 10.1159/000362362. Epub 2014 Aug 8.
The aim of this study was to develop a 17β-estradiol (E2)-releasing scaffold-nanoparticle system in order to promote osteogenic differentiation of rat adipose tissue-derived mesenchymal stem cells (AdMSCs) for bone tissue regeneration. E2-loaded poly(lactide-co-glycolide) (PLGA) nanoparticles with a diameter of ∼240 nm were produced via an emulsion-diffusion-evaporation method. Because of its higher encapsulation efficiency (54%), PLGA, which has a 65:35 composition, was chosen for the preparation of nanoparticles. Chitosan-hydroxyapatite (HA) scaffolds in macroporous structures with interconnected pores were prepared by combining microwave irradiation and gas-foaming techniques. PLGA nanoparticles were loaded onto scaffolds in 2 ways: via embedding after scaffold fabrication and during fabrication. While 100% of the loaded E2 was released during 55 days from scaffolds loaded by embedding, a controlled release behavior of E2 was observed over 135 days in scaffolds loaded during manufacture. The results of cell culture studies indicated that the controlled delivery of E2 from PLGA nanoparticles loaded on chitosan-HA scaffolds had a significant effect on the osteogenic differentiation of AdMSCs.
本研究的目的是开发一种释放17β-雌二醇(E2)的支架-纳米颗粒系统,以促进大鼠脂肪组织来源的间充质干细胞(AdMSCs)向成骨分化,用于骨组织再生。通过乳液扩散蒸发法制备了直径约为240 nm的负载E2的聚(丙交酯-共-乙交酯)(PLGA)纳米颗粒。由于其具有65:35组成的PLGA具有较高的包封率(54%),因此被选择用于制备纳米颗粒。通过结合微波辐射和气发泡技术制备了具有相互连通孔的大孔结构的壳聚糖-羟基磷灰石(HA)支架。PLGA纳米颗粒以两种方式负载到支架上:在支架制造后通过包埋以及在制造过程中。虽然通过包埋加载到支架上的E2在55天内100%释放,但在制造过程中加载的支架中,观察到E2在135天内具有控释行为。细胞培养研究结果表明,负载在壳聚糖-HA支架上的PLGA纳米颗粒对E2的控释对AdMSCs的成骨分化具有显著影响。