Schomberg Dominic, Wang Anyi, Marshall Hope, Miranpuri Gurwattan, Sillay Karl
Equal authors ; Department of Neurological Surgery, University of Wisconsin, Madison, WI, 53792;
Equal authors ; Department of Neurological Surgery, University of Wisconsin, Madison, WI, 53792; ; Department of Biomedical Engineering, University of Wisconsin, Madison, WI, 53706;
Ann Neurosci. 2013 Apr;20(2):59-64. doi: 10.5214/ans.0972.7531.200206.
Convection enhanced delivery (CED) is a technique using infusion convection currents to deliver therapeutic agents into targeted regions of the brain. Recently, CED is gaining significant acceptance for use in gene therapy of Parkinson's disease (PD) employing direct infusion into the brain. CED offers advantages in that it targets local areas of the brain, bypasses the blood-brain barrier (BBB), minimizes systemic toxicity of the therapeutics, and allows for delivery of larger molecules that diffusion driven methods cannot achieve. Investigating infusion characteristics such as backflow and morphology is important in developing standard and effective protocols in order to successfully deliver treatments into the brain. Optimizing clinical infusion protocols may reduce backflow, improve final infusion cloud morphology, and maximize infusate penetrance into targeted tissue.
The purpose of the current study was to compare metrics during ramped-rate and continuous-rate infusions using two different catheters in order to optimize current infusion protocols. Occasionally, the infusate refluxes proximally up the catheter tip, known as backflow, and minimizing this can potentially reduce undesirable effects in the clinical setting. Traditionally, infusions are performed at a constant rate throughout the entire duration, and backflow is minimized only by slow infusion rates, which increases the time required to deliver the desired amount of infusate. In this study, we investigate the effects of ramping and various infusion rates on backflow and infusion cloud morphology. The independent parameters in the study are: ramping, maximum infusion rate, time between rate changes, and increments of rate changes.
Backflow was measured using two methods: i) at the point of pressure stabilization within the catheter, and ii) maximum backflow as shown by video data. Infusion cloud morphology was evaluated based on the height-to-width ratio of each infusion cloud at the end of each experiment. Results were tabulated and statistically analyzed to identify any significant differences between protocols.
The experimental results show that CED rampedrate infusion protocols result in smaller backflow distances and more spherical cloud morphologies compared to continuous-rate infusion protocols ending at the same maximum infusion rate. Our results also suggest internal-line pressure measurements can approximate the time-point at which backflow ceases.
Our findings indicate that ramping CED infusion protocols can potentially minimize backflow and produce more spherical infusion clouds. However, further research is required to determine the strength of this correlation, especially in relation to maximum infusion rates.
对流增强递送(CED)是一种利用输注对流将治疗剂递送至脑内靶向区域的技术。近来,CED在帕金森病(PD)基因治疗中通过直接脑内输注的方式获得了广泛认可。CED具有诸多优势,它能够靶向脑内局部区域,绕过血脑屏障(BBB),使治疗剂的全身毒性降至最低,并且能够递送扩散驱动方法无法实现的大分子。在制定标准且有效的方案时,研究诸如回流和形态等输注特性对于成功将治疗剂递送至脑内至关重要。优化临床输注方案可能会减少回流,改善最终输注云团的形态,并使注入物在靶向组织中的渗透最大化。
本研究的目的是使用两种不同导管比较递增速率输注和连续速率输注期间的指标,以优化当前的输注方案。偶尔,注入物会沿导管尖端向近端回流,即所谓的回流,而将其降至最低可能会减少临床环境中的不良影响。传统上,输注在整个过程中以恒定速率进行,并且仅通过缓慢的输注速率来最小化回流,这增加了递送所需量注入物的时间。在本研究中,我们研究了递增和各种输注速率对回流和输注云团形态的影响。本研究中的独立参数为:递增、最大输注速率、速率变化之间的时间以及速率变化的增量。
使用两种方法测量回流:i)在导管内压力稳定点处;ii)视频数据显示的最大回流。根据每个实验结束时每个输注云团的高宽比评估输注云团形态。将结果制成表格并进行统计分析,以确定方案之间的任何显著差异。
实验结果表明,与以相同最大输注速率结束的连续速率输注方案相比,CED递增速率输注方案导致更小的回流距离和更球形的云团形态。我们的结果还表明,管路内压力测量可以近似回流停止的时间点。
我们的研究结果表明,递增CED输注方案可能会潜在地最小化回流并产生更球形的输注云团。然而,需要进一步研究以确定这种相关性的强度,特别是与最大输注速率相关的强度。