Department of Biomedical Engineering, Northwestern University , Evanston, Illinois 60208, United States.
ACS Nano. 2014 Oct 28;8(10):9998-10008. doi: 10.1021/nn502008x. Epub 2014 Sep 24.
Layers of end-grafted weak polyelectrolytes in poor solvent self-organize into a rich variety of structures (such as micelles, micelles coexisting with nonaggregated chains, stripes and layers with solvent-filled holes) due to the subtle competition among hydrophobic, electrostatic and steric interactions and the chemical acid-based equilibria of the weak polyelectrolyte. In this work, a molecular theory has been used to systematically study how nanoconfinement modulates the competition among these interactions and, therefore, dictates the morphology of the self-assembled layer. Two different types of confinement were considered and compared: (i) soft lateral confinement due to increasing surface coverage in a planar polyelectrolyte brush and (ii) hard vertical confinement due to the interaction of a planar polyelectrolyte brush with an opposing surface, as typically found in AFM-colloidal-tip and surface-force-apparatus experiments. It is shown that increasing the surface coverage (soft lateral confinement) or compressing the layer with an opposing wall (hard vertical confinement) have a similar qualitative effect on the morphology of the system: both types of nanoconfinement increase the stability of morphologies that extend in one or two dimensions (such as the homogeneous brush, holes and stripes) over nonextended aggregates (such as hemispherical micelles). However, vertical confinement can also lead to pillar-like structures that are not observed in the absence of the opposing wall. Interestingly, the pillar structures, which bridge the grafting and opposing surfaces, may coexist with metastable structures collapsed to the grafting surface only. This coexistence may help to understand the hysteresis commonly observed in surface-force experiments.
由于疏水性、静电和空间位阻相互作用以及弱聚电解质的基于化学酸碱的平衡之间的微妙竞争,末端接枝弱聚电解质的层在不良溶剂中自组织成多种结构(例如胶束、共存非聚集链的胶束、条纹和带有溶剂填充孔的层)。在这项工作中,使用分子理论系统地研究了纳米约束如何调节这些相互作用的竞争,从而决定了自组装层的形态。考虑并比较了两种不同类型的约束:(i)平面聚电解质刷中表面覆盖率增加引起的软横向约束,以及(ii)平面聚电解质刷与相对表面相互作用引起的硬垂直约束,这在 AFM-胶体尖端和表面力-装置实验中通常是如此。结果表明,增加表面覆盖率(软横向约束)或用相对壁压缩层(硬垂直约束)对系统形态具有相似的定性影响:这两种类型的纳米约束都增加了在一个或两个维度上延伸的形态的稳定性(例如均匀刷、孔和条纹),而不是非延伸聚集体(例如半球形胶束)。然而,垂直约束也可以导致在没有相对壁的情况下不会观察到的柱状结构。有趣的是,桥接接枝和相对表面的支柱结构可能与仅坍塌到接枝表面的亚稳结构共存。这种共存可能有助于理解表面力实验中通常观察到的滞后现象。