Ahmad Sheelan, Tucker Michael, Spooner Neil, Murnane Darragh, Gerhard Ute
Bioanalytical Science and Toxicokinetics, Drug Metabolism and Pharmacokinetics, GlaxoSmithKline Research and Development , Ware, Hertfordshire SG12 0DJ, U.K.
Anal Chem. 2015 Jan 6;87(1):754-9. doi: 10.1021/ac503706n. Epub 2014 Dec 15.
A novel approach is described for the quantitative bioanalysis of drugs in blood samples by ionization of the analytes collected on solid-phase microextraction (SPME) fibers by mass spectrometry (MS). The technique combines the attractive features of SPME microsampling using minimal sample volumes with the speed, selectivity, and sensitivity capabilities of MS detection. The method reported in this study involved generating gas-phase ions directly from SPME fibers without the need for any additional sample preparation or chromatographic separation; the entire process was completed within 5 min. Traditionally, analytes extracted by SPME fibers are desorbed by washing with suitable solvents followed by a transfer into a sample vial and subsequent liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis to quantify the amount of analyte extracted and thereby determining the analyte concentration in the matrix. These sample preparation steps are completely eliminated by inserting the SPME fiber directly into the MS. Physiologically relevant concentrations of metoprolol and propranolol in blood samples were measured over several orders of magnitude down to concentration levels of 10 ng/mL. This preliminary assessment of direct SPME-MS showed high sensitivity (ng/mL), acceptable reproducibility (<30%), and lack of carryover. This novel approach simplifies current bioanalytical procedures providing time and cost savings. It demonstrates considerable potential for qualitative and quantitative pharmaceutical bioanalysis as well as other areas of challenging environmental and food analysis.
本文描述了一种通过质谱(MS)对固相微萃取(SPME)纤维上收集的分析物进行电离,以实现血样中药物定量生物分析的新方法。该技术将使用最小样本量的SPME微采样的吸引人的特点与MS检测的速度、选择性和灵敏度相结合。本研究报道的方法涉及直接从SPME纤维产生气相离子,无需任何额外的样品制备或色谱分离;整个过程在5分钟内完成。传统上,通过SPME纤维提取的分析物通过用合适的溶剂洗涤进行解吸,然后转移到样品瓶中,随后进行液相色谱 - 串联质谱(LC-MS/MS)分析,以量化提取的分析物量,从而确定基质中分析物的浓度。通过将SPME纤维直接插入MS中,完全消除了这些样品制备步骤。在几个数量级范围内测量了血样中生理相关浓度的美托洛尔和普萘洛尔,低至10 ng/mL的浓度水平。这种直接SPME-MS的初步评估显示出高灵敏度(ng/mL)、可接受的重现性(<30%)且无残留。这种新方法简化了当前的生物分析程序,节省了时间和成本。它在定性和定量药物生物分析以及其他具有挑战性的环境和食品分析领域显示出巨大潜力。