Tasca Giordano, Vismara Riccardo, Fiore Gianfranco Beniamino, Romagnoni Claudia, Redaelli Alberto, Antona Carlo, Gamba Amando
Cardiac Surgery Unit, Cardiovascular Department, A. Manzoni Hospital, Lecco, Italy; Department of Electronic Information and Bioengineering, Politecnico di Milano, Milan, Italy.
Department of Electronic Information and Bioengineering, Politecnico di Milano, Milan, Italy; ForCardio.lab, Fondazione per la Ricerca in Cardiochirurgia ONLUS, Milan, Italy.
J Thorac Cardiovasc Surg. 2015 Mar;149(3):912-8. doi: 10.1016/j.jtcvs.2014.10.096. Epub 2014 Oct 24.
The in vivo hemodynamic performance of a bioprosthesis implanted in an aortic position is affected by the characteristics of the prosthesis and the sizing strategy adopted. Recently, it has been hypothesized that the type of suture used to implant the prosthesis might influence hemodynamics.
Bioprostheses with labeled sizes of 19 mm and 21 mm were implanted in 2 groups of 5 porcine aortic roots, with native annuli of 19 mm and 21 mm, by means of 2 different suture techniques: simple interrupted and noneverting mattress with pledgets. The aortic roots were tested in an in vitro mock loop. The stroke volume imposed by the mock loop was set at 40 mL, and was increased by steps of 15 mL until a stroke volume of 100 mL was attained. Main fluid-dynamic parameters were analyzed.
At each level of stroke volume, ie, 40 mL, 55 mL, 70 mL, 85 mL, and 100 mL, the mean and peak pressure drops were significantly greater with the noneverting mattress suture with pledgets than with the simple interrupted suture. The effective orifice area behaved accordingly, being significantly smaller in the former case.
Our data show that the type of suture technique can influence bioprosthesis performance and that it is reasonable to assume that this is especially true in small annuli (≤ 21 mm). Thus, to optimize prosthesis performance and reduce the incidence of patient-prosthesis mismatch, the role of the suture technique should not be disregarded.
植入主动脉位置的生物假体的体内血流动力学性能受假体特性和所采用的尺寸确定策略影响。最近,有人提出用于植入假体的缝合线类型可能会影响血流动力学。
将标记尺寸为19毫米和21毫米的生物假体通过两种不同的缝合技术植入两组各5个猪主动脉根部,其天然瓣环分别为19毫米和21毫米:单纯间断缝合和带垫片的外翻褥式缝合。在体外模拟循环中对主动脉根部进行测试。模拟循环施加的每搏量设定为40毫升,并以15毫升的步长增加,直至达到100毫升的每搏量。分析主要流体动力学参数。
在每搏量的各个水平,即40毫升、55毫升、70毫升、85毫升和100毫升时,带垫片的外翻褥式缝合的平均和峰值压力降显著大于单纯间断缝合。有效瓣口面积也相应变化,在前一种情况下明显更小。
我们的数据表明,缝合技术类型可影响生物假体性能,并且有理由认为在小瓣环(≤21毫米)中尤其如此。因此,为优化假体性能并降低患者-假体不匹配的发生率,不应忽视缝合技术的作用。