Ross James R, Larson Christopher M, Adeoye Olusanjo, Kelly Bryan T, Bedi Asheesh
Department of Orthopaedic Surgery, University of Michigan, MedSport, 24 Frank Lloyd Wright Drive, Ann Arbor, MI, 48106, USA.
Clin Orthop Relat Res. 2015 Apr;473(4):1388-95. doi: 10.1007/s11999-014-4069-9.
Previous studies have reported residual deformity to be the most common reason for revision hip arthroscopy. An awareness of the most frequent locations of the residual deformities may be critical to minimize these failures.
QUESTIONS/PURPOSES: The purposes of this study were to (1) define the three-dimensional (3-D) morphology of hips with residual symptoms before revision femoroacetabular impingement (FAI) surgery; (2) determine the limitation in range of motion (ROM) in these patients using dynamic, computer-assisted, 3-D analysis; and (3) compare these measures with a cohort of patients who underwent successful arthroscopic surgery for FAI by a high-volume hip arthroscopist.
Between 2008 and 2013, one senior surgeon (BTK) performed revision arthroscopic FAI procedures on patients with residual FAI deformity and symptoms after prior unsuccessful arthroscopic surgery; all of these 47 patients (50 hips) had preoperative CT scans. Mean patient age was 29 ± 9 years (range, 16-52 years). Three-dimensional models of the hips were created to allow measurements of femoral and acetabular morphology and ROM to bony impingement using a validated, computer-based dynamic imaging software. During the same time period, 65 patients with successful primary arthroscopic treatment of FAI by the same surgeon underwent preoperative CT scans for the symptomatic contralateral hip; this group of 65 patients thus fortuitously provided postoperative evaluation of the originally operated hip and served as a control group. A comparison of the virtual correction with the actual correction in the primary successful FAI treatment cohort was performed. Correspondingly, a comparison of the recommended virtual correction with the correction evident at the time of presentation after failed primary surgery in the revision cohort was performed. Analysis was performed by two independent observers (JRR, OA) and a paired t-test was used for comparison of continuous variables, whereas chi-square testing was used for categorical variables with p < 0.05 defined as significant.
Ninety percent (45 of 50) of patients undergoing revision surgery for symptomatic FAI had residual deformities; the mean maximal alpha angle in revision hips was 68° ± 16° and was most often located at 1:15, considering the acetabulum as a clockface and 1 to 5 o'clock as anterior independent of side. Twenty-six percent (13 of 50) of hips had signs of overcoverage with a lateral center-edge angle greater than or equal to 40°. Dynamic analysis revealed mean direct hip flexion of 114° ± 11° to osseous impingement. Internal rotation in 90° of hip flexion and flexion, adduction, internal rotation to osseous contact were 28° ± 12° and 20° ± 10°, respectively, which were less than those in hips that had underwent hip arthroscopy by a high-volume hip arthroscopist (all p < 0.001).
We found marked radiographic evidence of incomplete correction of deformity in patients with residual symptoms compared with patients with successful results with residual deformity present in the large majority of patients (45 of 50 [90%]) undergoing residual FAI surgery. We recommend careful attention to full 3-D resection of impinging structures.
既往研究报道残留畸形是髋关节镜翻修手术最常见的原因。了解残留畸形最常见的部位对于减少这些手术失败可能至关重要。
问题/目的:本研究的目的是:(1)明确翻修股骨髋臼撞击症(FAI)手术前有残留症状的髋关节的三维(3-D)形态;(2)使用动态、计算机辅助的三维分析确定这些患者的活动范围(ROM)受限情况;(3)将这些测量结果与一组由经验丰富的髋关节镜外科医生成功进行FAI关节镜手术的患者进行比较。
2008年至2013年间,一位资深外科医生(BTK)对先前关节镜手术失败后仍有FAI畸形和症状的患者进行了关节镜下FAI翻修手术;这47例患者(50髋)均进行了术前CT扫描。患者平均年龄为29±9岁(范围16 - 52岁)。使用经过验证的基于计算机的动态成像软件创建髋关节的三维模型,以测量股骨和髋臼形态以及至骨撞击的ROM。在同一时期,65例由同一位外科医生成功进行原发性FAI关节镜治疗的患者对有症状的对侧髋关节进行了术前CT扫描;这65例患者因此意外地提供了对最初手术髋关节的术后评估,并作为对照组。对原发性成功FAI治疗队列中的虚拟矫正与实际矫正进行了比较。相应地,对翻修队列中初次手术失败后就诊时明显的矫正与推荐的虚拟矫正进行了比较。由两名独立观察者(JRR,OA)进行分析,连续变量比较采用配对t检验,分类变量采用卡方检验,p < 0.05定义为有显著性差异。
因有症状的FAI接受翻修手术的患者中,90%(50例中的45例)存在残留畸形;翻修髋关节的平均最大α角为68°±16°,最常见于将髋臼视为钟面时的1:15位置,且1至5点为前方,与侧别无关。26%(50例中的13例)的髋关节有覆盖过度的迹象,外侧中心边缘角大于或等于40°。动态分析显示至骨撞击时髋关节平均直接屈曲为114°±11°。髋关节屈曲90°时的内旋以及屈曲、内收、内旋至骨接触分别为28°±12°和20°±10°,均低于由经验丰富的髋关节镜外科医生进行髋关节镜手术的髋关节(所有p < 0.001)。
我们发现,与手术成功的患者相比,有残留症状的患者存在明显的影像学证据表明畸形矫正不完全,大多数接受残留FAI手术的患者(50例中的45例[90%])存在残留畸形。我们建议仔细关注对撞击结构进行全面的三维切除。