Suppr超能文献

胸骨骨折的手术固定:术前规划及使用锁定钛板和深度限制钻孔的安全手术技术

Surgical fixation of sternal fractures: preoperative planning and a safe surgical technique using locked titanium plates and depth limited drilling.

作者信息

Schulz-Drost Stefan, Oppel Pascal, Grupp Sina, Schmitt Sonja, Carbon Roman Th, Mauerer Andreas, Hennig Friedrich F, Buder Thomas

机构信息

Orthopedic and Trauma Surgery, University Hospital Erlangen;

Orthopedic and Trauma Surgery, University Hospital Erlangen.

出版信息

J Vis Exp. 2015 Jan 5(95):e52124. doi: 10.3791/52124.

Abstract

Different ways to stabilize a sternal fracture are described in literature. Respecting different mechanisms of trauma such as the direct impact to the anterior chest wall or the flexion-compression injury of the trunk, there is a need to retain each sternal fragment in the correct position while neutralizing shearing forces to the sternum. Anterior sternal plating provides the best stability and is therefore increasingly used in most cases. However, many surgeons are reluctant to perform sternal osteosynthesis due to possible complications such as difficulties in preoperative planning, severe injuries to mediastinal organs, or failure of the performed method. This manuscript describes one possible safe way to stabilize different types of sternal fractures in a step by step guidance for anterior sternal plating using low profile locking titanium plates. Before surgical treatment, a detailed survey of the patient and a three dimensional reconstructed computed tomography is taken out to get detailed information of the fracture's morphology. The surgical approach is usually a midline incision. Its position can be described by measuring the distance from upper sternal edge to the fracture and its length can be approximated by the summation of 60 mm for the basis incision, the thickness of presternal soft tissue and the greatest distance between the fragments in case of multiple fractures. Performing subperiosteal dissection along the sternum while reducing the fracture, using depth limited drilling, and fixing the plates prevents injuries to mediastinal organs and vessels. Transverse fractures and oblique fractures at the corpus sterni are plated longitudinally, whereas oblique fractures of manubrium, sternocostal separation and any longitudinally fracture needs to be stabilized by a transverse plate from rib to sternum to rib. Usually the high convenience of a patient is seen during follow up as well as a precise reconstruction of the sternal morphology.

摘要

文献中描述了稳定胸骨骨折的不同方法。考虑到不同的创伤机制,如前胸壁的直接撞击或躯干的屈曲压缩损伤,需要将每个胸骨碎片保持在正确位置,同时抵消对胸骨的剪切力。胸骨前路钢板固定提供了最佳的稳定性,因此在大多数情况下越来越多地被使用。然而,由于可能出现的并发症,如术前规划困难、纵隔器官严重损伤或所采用方法的失败,许多外科医生不愿进行胸骨骨固定术。本手稿描述了一种可能的安全方法,通过使用低轮廓锁定钛板进行胸骨前路钢板固定的逐步指导,来稳定不同类型的胸骨骨折。在手术治疗前,对患者进行详细检查并进行三维重建计算机断层扫描,以获取骨折形态的详细信息。手术入路通常为中线切口。其位置可通过测量胸骨上缘到骨折处的距离来描述,其长度可通过基础切口60mm、胸骨前软组织厚度以及多处骨折时碎片之间的最大距离之和来近似估算。在复位骨折时沿胸骨进行骨膜下剥离,采用深度受限钻孔,并固定钢板,可防止对纵隔器官和血管的损伤。胸骨体的横行骨折和斜行骨折采用纵向钢板固定,而胸骨柄的斜行骨折、胸肋分离以及任何纵向骨折则需要通过从肋骨到胸骨再到肋骨的横向钢板来稳定。通常在随访期间可以看到患者的高度便利性以及胸骨形态的精确重建。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验