Li Haiyue, Zhang Yanhang
Department of Mechanical Engineering, Boston University, Boston, MA, USA.
Department of Mechanical Engineering, Boston University, Boston, MA, USA Department of Biomedical Engineering, Boston University, Boston MA, USA.
Biorheology. 2014;51(6):369-80. doi: 10.3233/BIR-14032.
Viscoelastic materials contain a continuous spectrum of relaxation time constants that cannot be measured directly from experiments. To model the viscoelastic behavior, discrete Generalized Maxwell model is usually chosen phenomenologically from direct fitting.
In the present study, a theoretical framework was developed to determine the continuous spectrum of relaxation time constants, and then applied to study the dynamic rheological behavior of collagen gel using a parallel plate rheometer.
Frequency sweep tests were performed to determine the storage and loss modulus of collagen gel. To obtain the continuous relaxation spectrum, Tikhonov regularization method was employed to solve the Fredholm integral equations. A Finite Element Model (FEM) was created to simulate the rheological measurement with viscous material parameters obtained from both direct fitting and continuous spectrum.
Discrete spectrum obtained by direct fitting method is not unique and highly depends on the specified fitting criteria. Continuous spectrum obtained by Tikhonov regularization effectively eliminates the possibility of getting nonunique solutions. The storage and loss modulus calculated from FEM compared well with the experimental results.
Continuous relaxation spectrum can be determined based on dynamic rheological shear measurements, and incorporated into FEM to study the behavior of viscoelastic materials.
粘弹性材料包含一系列连续的弛豫时间常数,无法直接通过实验测量。为了模拟粘弹性行为,通常从直接拟合中凭经验选择离散广义麦克斯韦模型。
在本研究中,开发了一个理论框架来确定弛豫时间常数的连续谱,然后应用平行板流变仪研究胶原凝胶的动态流变行为。
进行频率扫描测试以确定胶原凝胶的储能模量和损耗模量。为了获得连续弛豫谱,采用蒂霍诺夫正则化方法求解弗雷德霍姆积分方程。创建有限元模型(FEM),用从直接拟合和连续谱获得的粘性材料参数模拟流变测量。
直接拟合方法得到的离散谱不唯一,并且高度依赖于指定的拟合标准。通过蒂霍诺夫正则化获得的连续谱有效地消除了得到非唯一解的可能性。有限元模型计算的储能模量和损耗模量与实验结果吻合良好。
可以基于动态流变剪切测量确定连续弛豫谱,并将其纳入有限元模型以研究粘弹性材料的行为。