Tymonko Steven A, Smith Russell C, Ambrosi Andrea, Ober Michael H, Wang Hao, Denmark Scott E
Roger Adams Laboratory, Department of Chemistry, University of Illinois, Urbana, Illinois 61801, United States.
J Am Chem Soc. 2015 May 20;137(19):6200-18. doi: 10.1021/jacs.5b02518. Epub 2015 May 6.
Through the combination of reaction kinetics (both stoichiometric and catalytic), solution- and solid-state characterization of arylpalladium(II) arylsilanolates, and computational analysis, the intermediacy of covalent adducts containing Si-O-Pd linkages in the cross-coupling reactions of arylsilanolates has been unambiguously established. Two mechanistically distinct pathways have been demonstrated: (1) transmetalation via a neutral 8-Si-4 intermediate that dominates in the absence of free silanolate (i.e., stoichiometric reactions of arylpalladium(II) arylsilanolate complexes), and (2) transmetalation via an anionic 10-Si-5 intermediate that dominates in the cross-coupling under catalytic conditions (i.e., in the presence of free silanolate). Arylpalladium(II) arylsilanolate complexes bearing various phosphine ligands have been isolated, fully characterized, and evaluated for their kinetic competence under thermal (stoichiometric) and anionic (catalytic) conditions. Comparison of the rates for thermal and anionic activation suggested, but did not prove, that intermediates containing the Si-O-Pd linkage were involved in the cross-coupling process. The isolation of a coordinatively unsaturated, T-shaped arylpalladium(II) arylsilanolate complex ligated with t-Bu3P allowed the unambiguous demonstration of the operation of both pathways involving 8-Si-4 and 10-Si-5 intermediates. Three kinetic regimes were identified: (1) with 0.5-1.0 equiv of added silanolate (with respect to arylpalladium bromide), thermal transmetalation via a neutral 8-Si-4 intermediate; (2) with 1.0-5.0 equiv of added silanolate, activated transmetalation via an anionic 10-Si-5 intermediate; and (3) with >5.0 equiv of added silanolate, concentration-independent (saturation) activated transmetalation via an anionic 10-Si-5 intermediate. Transition states for the intramolecular transmetalation of neutral (8-Si-4) and anionic (10-Si-5) intermediates have been located computationally, and the anionic pathway is favored by 1.8 kcal/mol. The energies of all intermediates and transition states are highly dependent on the configuration around the palladium atom.
通过反应动力学(化学计量和催化)、芳基钯(II)芳基硅醇盐的溶液和固态表征以及计算分析相结合,明确证实了在芳基硅醇盐的交叉偶联反应中含Si-O-Pd键的共价加合物的中间体性质。已证明了两种机制不同的途径:(1)通过中性8-Si-4中间体进行的金属转移,在没有游离硅醇盐的情况下(即芳基钯(II)芳基硅醇盐配合物的化学计量反应)占主导;(2)通过阴离子10-Si-5中间体进行的金属转移,在催化条件下(即在存在游离硅醇盐的情况下)的交叉偶联中占主导。已分离出带有各种膦配体的芳基钯(II)芳基硅醇盐配合物,对其进行了全面表征,并评估了它们在热(化学计量)和阴离子(催化)条件下的动力学活性。热活化和阴离子活化速率的比较表明(但未证明),含Si-O-Pd键的中间体参与了交叉偶联过程。分离出一种与叔丁基膦配位不饱和的T形芳基钯(II)芳基硅醇盐配合物,明确证明了涉及8-Si-4和10-Si-5中间体的两种途径的运行情况。确定了三种动力学区域:(1)加入0.5 - 1.0当量的硅醇盐(相对于芳基溴化钯)时,通过中性8-Si-4中间体进行热金属转移;(2)加入1.0 - 5.0当量的硅醇盐时,通过阴离子10-Si-5中间体进行活化金属转移;(3)加入>5.0当量的硅醇盐时,通过阴离子10-Si-5中间体进行浓度无关(饱和)的活化金属转移。通过计算确定了中性(8-Si-4)和阴离子(10-Si-5)中间体分子内金属转移的过渡态,阴离子途径比中性途径更有利,优势为1.8千卡/摩尔。所有中间体和过渡态的能量高度依赖于钯原子周围的构型。