Gupta Prachi, Authimoolam Sundar P, Hilt J Zach, Dziubla Thomas D
Department of Chemical and Materials Engineering, University of Kentucky, Lexington, KY 40506-0046, USA.
Department of Chemical and Materials Engineering, University of Kentucky, Lexington, KY 40506-0046, USA.
Acta Biomater. 2015 Nov;27:194-204. doi: 10.1016/j.actbio.2015.08.039. Epub 2015 Aug 28.
PβAE polymers have emerged as highly promising candidates for biomedical and drug delivery applications owing to their tunable, degradable and pH sensitive properties. These polymeric systems can serve as prodrug carriers for the delivery of bioactive compounds which suffer from poor aqueous solubility, low bioavailability and are biologically unstable, such as the antioxidant, quercetin. Using acrylate functionalized quercetin, it is possible to incorporate the polyphenol into the backbone of the polymer matrix, permitting slow release of the intact molecule which is perfectly timed with the polymer degradation. While formulating these quercetin conjugated PβAE matrix into nanocarriers would allow for multiple delivery routes (oral, intravenous, inhalation etc.), well known oil-water nano-emulsion formulation methods are not amenable to the crosslinked hydrolytically sensitive nanoparticle/nanogel. In this work, a single-phase reaction-precipitation method was developed to formulate quercetin conjugated PβAE nanogels (QNG) via reaction of acrylated quercetin (4-5 acrylate groups) with a secondary diamine under dilute conditions using acetonitrile as the reaction medium, resulting in a self-stabilized suspension. The proposed approach permits the post synthesis modification of the spherical nanogels with a PEGylated coating, enhancing their aqueous stability and stealth characteristics. Nanogel size was controlled by varying feed reactant concentrations, achieving drug loadings of 25-38wt%. Uniform release of quercetin over 45-48h was observed upon PβAE ester hydrolysis under physiological conditions with its retained antioxidant activity over the extended times.
Here we present the first demonstration of using poly(beta amino ester) chemistry to form nanogels composed of a bioactive polyphenol for the control of cellular oxidative stress. Previous nanogel and nanoparticle approaches, which use a water phase, are not readily amenable to PBAE chemistry due to their hydrolytic sensitivity. Here we demonstrate a simple approach to control particle size, modify surface chemistry and achieve highly regulated controlled release of active antioxidants, which can protect cells against external oxidative stress signals. This work has importance in the area of controlling material biocompatibility through augmenting the antioxidant status of cells.
由于其可调节、可降解和pH敏感的特性,聚(β-氨基酯)(PβAE)聚合物已成为生物医学和药物递送应用中极具潜力的候选材料。这些聚合物体系可作为前药载体,用于递送水溶性差、生物利用度低且生物不稳定的生物活性化合物,如抗氧化剂槲皮素。通过丙烯酸酯官能化的槲皮素,可以将多酚掺入聚合物基质的主链中,使完整分子缓慢释放,且释放时间与聚合物降解完美同步。虽然将这些槲皮素共轭的PβAE基质制成纳米载体可实现多种给药途径(口服、静脉注射、吸入等),但众所周知的油包水纳米乳液配方方法并不适用于交联的水解敏感纳米颗粒/纳米凝胶。在这项工作中,开发了一种单相反应沉淀法,通过丙烯酸化槲皮素(4 - 5个丙烯酸酯基团)与仲二胺在稀溶液条件下以乙腈为反应介质反应,制备槲皮素共轭的PβAE纳米凝胶(QNG),得到一种自稳定悬浮液。所提出的方法允许对球形纳米凝胶进行聚乙二醇化涂层的后合成修饰,增强其在水中的稳定性和隐身特性。通过改变进料反应物浓度来控制纳米凝胶尺寸,实现了25 - 38wt%的药物负载量。在生理条件下,PβAE酯水解时观察到槲皮素在45 - 48小时内均匀释放,且在延长时间内保持其抗氧化活性。
在此,我们首次展示了利用聚(β-氨基酯)化学方法形成由生物活性多酚组成的纳米凝胶以控制细胞氧化应激。先前使用水相的纳米凝胶和纳米颗粒方法,由于其水解敏感性,不太适用于PBAE化学。在此,我们展示了一种简单的方法来控制颗粒尺寸、修饰表面化学性质并实现活性抗氧化剂的高度调控控释,从而保护细胞免受外部氧化应激信号的影响。这项工作在通过增强细胞抗氧化状态来控制材料生物相容性领域具有重要意义。