Kumar Krishna N, Sarkar Kausik
Department of Mechanical and Aerospace Engineering, The George Washington University, Washington, DC 20052, USA.
J Acoust Soc Am. 2015 Aug;138(2):624-34. doi: 10.1121/1.4923364.
Ultrasound contrast microbubbles experience widely varying ambient blood pressure in different organs, which can also change due to diseases. Pressure change can alter the material properties of the encapsulation of these microbubbles. Here the characteristic rheological parameters of contrast agent Definity are determined by varying the ambient pressure (in a physiologically relevant range 0-200 mm Hg). Four different interfacial rheological models are used to characterize the microbubbles. Effects of gas diffusion under excess ambient pressure are investigated in detail accounting for size decrease of contrast microbubbles. Definity contrast agent show a change in their interfacial dilatational viscosity (3.6 × 10(-8) Ns/m at 0 mm Hg to 4.45 × 10(-8) Ns/m at 200 mm Hg) and interfacial dilatational elasticity (0.86 N/m at 0 mm Hg to 1.06 N/m at 200 mm Hg) with ambient pressure increase. The increase results from material consolidation, similar to such enhancement in bulk properties under pressure. The model that accounts for enhancement in material properties with increasing ambient pressure matches with experimentally measured subharmonic response as a function of ambient pressure, while assuming constant material parameters does not.
超声造影微泡在不同器官中会经历广泛变化的周围血压,而且血压也会因疾病而改变。压力变化会改变这些微泡包膜的材料特性。在此,通过改变周围压力(在0 - 200 mmHg的生理相关范围内)来确定造影剂Definity的特征流变学参数。使用四种不同的界面流变学模型来表征微泡。详细研究了在过高周围压力下气体扩散的影响,并考虑了造影微泡尺寸的减小。Definity造影剂随着周围压力升高,其界面膨胀粘度(在0 mmHg时为3.6×10⁻⁸ Ns/m,在200 mmHg时为4.45×10⁻⁸ Ns/m)和界面膨胀弹性(在0 mmHg时为0.86 N/m,在200 mmHg时为1.06 N/m)发生变化。这种增加是由材料固结导致的,类似于压力下本体性能的这种增强。考虑到随着周围压力增加材料性能增强的模型与作为周围压力函数的实验测量次谐波响应相匹配,而假设材料参数恒定则不匹配。