Beijing Laboratory of Biomedical Materials Beijing University of Chemical Technology, Beijing 100029, PR China.
Chembiotech Laboratories, University of Birmingham Research Park, Vincent Drive, Birmingham B15 2SQ, UK.
Carbohydr Polym. 2015 Nov 20;133:67-73. doi: 10.1016/j.carbpol.2015.06.096. Epub 2015 Jul 11.
Amines monomers, N,N-dimethylaminoethyl methacrylate (DMAEMA), N,N-dimethylethanolamine (DMEA), 2-dimethylaminoethylamine (DMEDA) and N-methiyldiethanolamine (MDEA) were used to induce the formation of calcium carbonate (CaCO3) crystals on chitosan films, by using (NH4)2CO3 diffusion method at ambient temperature. The obtained CaCO3 particles were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD) and Energy dispersive spectroscopy (EDS). The influence of reaction variables, such as the additive concentration and their types were also investigated on the products. The morphologies of CaCO3 crystals, inter-grown in cube-shape, were controlled by DMAEMA and DMEA. It was observed that the morphologies of CaCO3 changed from the cube grown arms to massive calcite with a hole on the face by increasing the concentrations of DMEDA and MDEA. While the precipitation grew on chitosan film without any organic additive, only single cube-shaped crystals were obtained. By these results the possible mechanisms can be proposed that electronic movement of the groups on the monomer effected ions configuration and molecules absorbed on the exposed surface, resulted the change of the surface energy, which caused the change in the morphology of CaCO3.
胺单体,N,N-二甲基氨基乙基甲基丙烯酸酯(DMAEMA),N,N-二甲基乙醇胺(DMEA),2-二甲氨基乙基胺(DMEDA)和 N-甲氧基二乙醇胺(MDEA)被用于通过室温下的(NH4)2CO3扩散方法在壳聚糖膜上诱导碳酸钙(CaCO3)晶体的形成。通过扫描电子显微镜(SEM)、X 射线衍射(XRD)和能量色散光谱(EDS)对所得的 CaCO3 颗粒进行了表征。还研究了反应变量,如添加剂浓度及其类型对产物的影响。通过 DMAEMA 和 DMEA 控制 CaCO3 晶体的形态,使其在立方体形状之间相互生长。观察到,随着 DMEDA 和 MDEA 浓度的增加,CaCO3 的形态从立方体生长的臂状变为具有面上孔的块状方解石。而在没有任何有机添加剂的壳聚糖膜上沉淀时,仅获得单一的立方体状晶体。通过这些结果,可以提出可能的机制,即单体上的基团的电子运动影响离子的构型和吸附在暴露表面上的分子,导致表面能的变化,从而导致 CaCO3 形态的变化。