A facile and versatile approach for controlling electroosmotic flow in capillary electrophoresis via mussel inspired polydopamine/polyethyleneimine co-deposition.

Electroosmotic flow (EOF), which reveals the charge property of capillary inner surface, has an important impact on the separation performance and reproducibility of capillary electrophoresis (CE). In this study, a novel, facile and versatile method to achieve diverse and controllable EOF in CE was reported based on the co-deposition of mussel-inspired polydopamine (PDA) and branched polyethyleneimine (PEI) on the capillary inner surface as the hybrid functional coating. After these PDA/PEI co-deposited columns were reinforced by the post-incubation of FeCl3, various magnitude and direction of EOF in CE could be easily achieved by varying a number of preparation parameters, including the mass ratio of DA/PEI and the molecular weight of PEI (including PEI-600, PEI-1800, PEI-10000 and PEI-70000). The separation effectiveness and stability of the hybrid coated columns were verified by the analysis of aromatic acids and aniline derivatives. The results showed that the controllable and diverse EOF was important in enhancing the separation performance of the analytes. The baseline separation of all the five aromatic acids can be achieved in 7 min with high separation efficiency by using the PDA/PEI-600 co-deposited column with the mass ratio of 6:1. On the other hand, with the PDA/PEI-70000 co-deposited column with the mass ratio of 6:1, the aniline compounds were easily baseline separated within 10 min. By contrast, using the bare and PDA coated columns, the migration of the aromatic acids was very slow and the baseline separation of the aniline compounds cannot be obtained. Moreover, the co-deposited columns showed long lifetime and good stability. The relative standard deviations for intra-day, inter-day and capillary-to-capillary repeatability of the PDA/PEI-600 co-deposited column with the mass ratio of 6:1, which was reinforced by the post-incubation of FeCl3, were all lower than 5%.