Fei Xunchang, Zekkos Dimitrios, Raskin Lutgarde
Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI 48109-2125, United States.
Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, MI 48109-2125, United States.
Waste Manag. 2016 Sep;55:276-87. doi: 10.1016/j.wasman.2015.10.015. Epub 2015 Oct 29.
The energy conversion potential of municipal solid waste (MSW) disposed of in landfills remains largely untapped because of the slow and variable rate of biogas generation, delayed and inefficient biogas collection, leakage of biogas, and landfill practices and infrastructure that are not geared toward energy recovery. A database consisting of methane (CH4) generation data, the major constituent of biogas, from 49 laboratory experiments and field monitoring data from 57 landfills was developed. Three CH4 generation parameters, i.e., waste decay rate (k), CH4 generation potential (L0), and time until maximum CH4 generation rate (tmax), were calculated for each dataset using U.S. EPA's Landfill Gas Emission Model (LandGEM). Factors influencing the derived parameters in laboratory experiments and landfills were investigated using multi-linear regression analysis. Total weight of waste (W) was correlated with biodegradation conditions through a ranked classification scheme. k increased with increasing percentage of readily biodegradable waste (Br0 (%)) and waste temperature, and reduced with increasing W, an indicator of less favorable biodegradation conditions. The values of k obtained in the laboratory were commonly significantly higher than those in landfills and those recommended by LandGEM. The mean value of L0 was 98 and 88L CH4/kg waste for laboratory and field studies, respectively, but was significantly affected by waste composition with ranges from 10 to 300L CH4/kg. tmax increased with increasing percentage of biodegradable waste (B0) and W. The values of tmax in landfills were higher than those in laboratory experiments or those based on LandGEM's recommended parameters. Enhancing biodegradation conditions in landfill cells has a greater impact on improving k and tmax than increasing B0. Optimizing the B0 and Br0 values of landfilled waste increases L0 and reduces tmax.
由于沼气产生速度缓慢且变化不定、沼气收集延迟且效率低下、沼气泄漏,以及填埋场的作业和基础设施不利于能源回收,填埋处置的城市固体废物(MSW)的能源转换潜力在很大程度上尚未得到开发。开发了一个数据库,该数据库包含来自49个实验室实验的甲烷(CH4)产生数据(沼气的主要成分)以及来自57个填埋场的现场监测数据。使用美国环境保护局(EPA)的填埋气排放模型(LandGEM)为每个数据集计算了三个CH4产生参数,即废物衰减率(k)、CH4产生潜力(L0)和达到最大CH4产生速率的时间(tmax)。使用多元线性回归分析研究了影响实验室实验和填埋场中导出参数的因素。通过分级分类方案将废物总重量(W)与生物降解条件相关联。k随着易生物降解废物百分比(Br0(%))和废物温度的增加而增加,并随着W的增加而降低,W是生物降解条件较差的一个指标。在实验室中获得的k值通常显著高于填埋场中的值以及LandGEM推荐的值。实验室研究和现场研究中L0的平均值分别为98和88L CH4/千克废物,但受废物成分的显著影响,范围为10至300L CH4/千克。tmax随着可生物降解废物百分比(B0)和W的增加而增加。填埋场中的tmax值高于实验室实验中的值或基于LandGEM推荐参数的值。改善填埋单元中的生物降解条件对提高k和tmax的影响大于增加B0。优化填埋废物的B0和Br0值可提高L0并降低tmax。