State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin, China.
Department of Chemical Engineering, National Cheng Kung University, Tainan, Taiwan.
Bioresour Technol. 2016 Jan;200:557-64. doi: 10.1016/j.biortech.2015.10.056. Epub 2015 Oct 27.
This study presents a successful butanol production method using alkali and acid pretreated biomass of Chlorella vulgaris JSC-6. The butanol concentration, yield, and productivity were 13.1g/L, 0.58mol/mol sugar, 0.66g/L/h, respectively. Nearly 2.93L/L of biohydrogen was produced during the acidogenesis phase in ABE fermentation. The hydrogen yield and productivity were 0.39mol/mol sugar and 104.2g/L/h respectively. In addition, the high glucose consumption efficiency (97.5%) suggests that the hydrolysate pretreated with NaOH (1%) followed by H2SO4 (3%) did not contain inhibitors to the fermentation. It was also discovered that an excess amount of nitrogen sources arising from hydrolysis of highly concentrated microalgal biomass negatively affected the butanol production. This work demonstrates the technical feasibility of producing butanol from sustainable third-generation feedstock (i.e., microalgal biomass).
本研究提出了一种使用碱和酸预处理小球藻 JSC-6 生物质来生产丁醇的成功方法。丁醇浓度、产率和生产能力分别为 13.1g/L、0.58mol/mol 糖、0.66g/L/h。在 ABE 发酵的产酸相中,产生了近 2.93L/L 的生物氢气。氢气的产率和生产能力分别为 0.39mol/mol 糖和 104.2g/L/h。此外,高葡萄糖消耗效率(97.5%)表明,用 1%的 NaOH 和 3%的 H2SO4 预处理的水解物中不含发酵抑制剂。还发现,来自高浓度微藻生物质水解的过量氮源会对丁醇的生产产生负面影响。这项工作证明了使用可持续的第三代原料(即微藻生物质)生产丁醇的技术可行性。