Effect of adjusted pH prior to ultrafiltration of skim milk on membrane performance and physical functionality of milk protein concentrate.

Processing conditions during ultrafiltration of skim milk influence properties of the casein micelle and thereby the physical properties of milk protein concentrate (MPC). The aim of the study was to establish the effects of pH adjustment of skim milk feed to obtain MPC with desired emulsification properties. The ultrafiltration was conducted using commercially pasteurized skim milk with the pH adjusted to 6.7 (control), 6.3, 5.9, or 5.5 at 15°C until a volume concentration factor of 5 was reached. Effects of pH adjustment on selected physico-chemical properties (Ca content, particle size, ζ-potential) and functionalities (solubility, heat stability, emulsification capacity, and stability) of MPC were determined. Lowering the feed pH solubilized colloidal calcium phosphate that substantially contributed to modifying the properties of casein. This caused a reduction in the particle size while increasing the net negative charge. The structural modifications in proteins were manifested in the Fourier transform infrared spectra. Subsequent concentration did not induce any further protein structural changes. Such modifications to the casein micelles and colloidal calcium phosphate negatively affected the solubility and heat stability of the corresponding MPC powders. However, the emulsion activity index improved only until the pH of the feed was lowered to 5.9 and declined when pH was dropped to 5.5, followed with the loss of stability. Readjusting the pH of MPC powder dispersions to 6.7 restored their surface properties and thereby their functionality. Lowering the feed pH also negatively affected the membrane performance by clogging the membrane pores and lowering the flux, particularly at pH 5.5. Adjusting pH to 5.9 produced MPC with optimum emulsifying properties with minimal influence on membrane performance.